Page 57 of 57 FirstFirst ... 52 53 54 55 56 57
Results 1,401 to 1,411 of 1411
  1. #1401
    Join Date
    Aug 2018
    Posts
    33
    Quote Originally Posted by Dshack89 View Post
    Yeah I didn't have any luck finding anything either. I just replaced my Kingpins with Alpinists, so my toe was a direct fit but I had to drill 4 new holes for the heel. I wasn't confident I could keep the heel squared up if I freehanded it, so I made this PDF for the heel. You could combine that with a Kingpin toe mounting plate. Only thing you'd need to deal with is getting the BSL right, but that shouldn't be too hard.

    Hope this is helpful!
    That's awesome, thanks!

  2. #1402
    Join Date
    Oct 2008
    Location
    Somewhere else
    Posts
    3,667
    Knut... your library of templates is great... thanks!

    I found an "error" on one template. On the Warden 11 template you have the heel screw front to back measure STATED as 75mm but it measure out around 80mm.

    I say "error" because I have a warden 11 demo (non-MNC) and my heel track lines up exactly with your template heel, but I measure that spacing at ~79mm with digital calipers. gregorys made a warden 11 demo template he posted a link to and he measures it at 80mm, FWIW.

    I can't comment at all on the toe piece because the demo toe isn't close to the what you have there.
    Goal: ski in the 2018/19 season

  3. #1403
    Join Date
    Jun 2018
    Location
    Portland, OR
    Posts
    599
    Quote Originally Posted by Shorty_J View Post
    Knut... your library of templates is great... thanks!

    I found an "error" on one template. On the Warden 11 template you have the heel screw front to back measure STATED as 75mm but it measure out around 80mm.

    I say "error" because I have a warden 11 demo (non-MNC) and my heel track lines up exactly with your template heel, but I measure that spacing at ~79mm with digital calipers. gregorys made a warden 11 demo template he posted a link to and he measures it at 80mm, FWIW.

    I can't comment at all on the toe piece because the demo toe isn't close to the what you have there.
    I don't see an error. Are the Warden 11 heelplates different than the 13?


    That looks like 75mm, on center, to me. If you're mounting used Wardens, there's around +-5mm wiggle room for the two front screws, because those black plastic inserts and the stainless steel plate on top are made to slide.


  4. #1404
    Join Date
    Nov 2011
    Posts
    59
    testmounted Tyrolia Attack 13 using jondrums's Tyrolia template R4.pdf, I found they are about 6mm forward than the line which I intended.
    I made some mistakes or the template is not for Attacks?
    I think I can simply set back 6mm but please let me know if anyone knows better or updated template.

  5. #1405
    Join Date
    Nov 2011
    Posts
    59
    I've found another template for Tyrolia by Powder Guide.
    Printed and compared, It seems fine.


    Sent from my iPhone using TGR Forums

  6. #1406
    Join Date
    Nov 2011
    Posts
    59
    Judging by my test,

    toe of PG's is perfect.
    heel of PG's is OK but 2.5mm father(select 5mm longer BSL) is better to center of forward pressure indecator.
    toe of BF's needs to be shortened 5mm(select 10mm shorter BSL).
    heel of BF's OK same as PG's but 2.5mm father(select 5mm longer BSL) is better, too.


    Sent from my iPhone using TGR Forums

  7. #1407
    Join Date
    Apr 2012
    Location
    N@
    Posts
    366
    Yeah there have been known issues with the tyrolia template in this thread for some time now. It's been a while since I used it last but I think the jigarex tyrolia plate is off by the same amount as well. I came here to point you to the powderguide template, but I see that you've found it already. That's what I use (instead of the BF template and jigarex plates) for all my tyrolia mounts.

  8. #1408
    Join Date
    Oct 2008
    Location
    Somewhere else
    Posts
    3,667
    I don't know if the 11 and 13 have different heel patterns as I've only ever owned the 11 demo.

    But my point was that on the template itself, the hole spacing is around 79-80mm (measured on the paper) but it SAYS its 75mm.

    Sent from my SM-A505W using Tapatalk
    Goal: ski in the 2018/19 season

  9. #1409
    Join Date
    Jun 2018
    Location
    Portland, OR
    Posts
    599

    Binding Mount Paper Templates

    Quote Originally Posted by Shorty_J View Post
    I don't know if the 11 and 13 have different heel patterns as I've only ever owned the 11 demo.

    But my point was that on the template itself, the hole spacing is around 79-80mm (measured on the paper) but it SAYS its 75mm.

    Sent from my SM-A505W using Tapatalk
    Maybe we're using different metric systems. Are you printing to scale? This is what I measure.



    Post a link to the template you're using.

    Edit: Fack. Never mind. I see what you're saying now. I'm not looking at the same template as you.

  10. #1410
    Join Date
    Oct 2008
    Location
    Somewhere else
    Posts
    3,667
    ^^^ you got it.

    Sent from my SM-A505W using Tapatalk
    Goal: ski in the 2018/19 season

  11. #1411
    Join Date
    Jun 2018
    Location
    Portland, OR
    Posts
    599
    Quote Originally Posted by Shorty_J View Post
    ^^^ you got it.

    Sent from my SM-A505W using Tapatalk
    Took a couple of tries.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •