Results 1,326 to 1,350 of 1728
Thread: Binding Mount Paper Templates
-
12-19-2018, 11:14 AM #1326Registered User
- Join Date
- Nov 2018
- Location
- San Diego
- Posts
- 105
I have an old pair of Pivot 18s that I need to replace. Their hole pattern matches the FKS template here (just only 4 toe screws, though). I was thinking about going to a Pivot 14, but want to use the same holes. Do the newer Pivot 14 AW bindings have the same pattern as the older P18/FKS bindings (ie. the FKS template here), or will they have the Look Pivot/Axial pattern... or something different? Sorry for the Jong question, but couldn't confirm the answer with a search. Thanks!
-
12-19-2018, 02:35 PM #1327one-track mind
- Join Date
- Jul 2004
- Location
- NorCal
- Posts
- 2,285
- TRADE your heavy PROTESTS for my lightweight version at this thread
"My biggest goal in life has always been to pursue passion and to make dreams a reality. I love my daughter, but if I had to quit my passions for her, then I would be setting the wrong example for her, and I would not be myself anymore. " -Shane
"I'm gonna go SO OFF that NO ONE's ever gonna see what I'm gonna do!" -Saucerboy
-
12-19-2018, 05:51 PM #1328Registered User
- Join Date
- Nov 2018
- Location
- San Diego
- Posts
- 105
-
12-19-2018, 10:25 PM #1329meepmoop24
- Join Date
- Apr 2014
- Posts
- 228
-
12-19-2018, 11:35 PM #1330
-
12-21-2018, 01:27 AM #1331
I mounted a pair with the template yesterday and I think the hole pattern for the heel piece is 7 mm too far back compared to the jig.
The result is that the brake assembly will sit too far forward on the base plate rails and have less support than intended.
Don't have access to the jig for some time now so I can't measure exactly.
But I have two pair of skis where one was mounted with jig and one with the template and they differ by 7 mm for the heel.
Boot center lines up fine.
-
12-21-2018, 01:32 AM #1332
-
12-21-2018, 02:01 AM #1333
I used the current version. Opened it in Illustrator and cut a decal in the vinyl cutter with the hole patterns spaced and lined up for my boot sole.
Printed the paper templates and double checked that they were identical with the sticker I cut. Test mounted on a piece of wood.
I have a few more mounts to do so it's nice to have a stack of template stickers ready when I have the equipment for it.
-
12-21-2018, 04:01 AM #1334
Binding Mount Paper Templates
Not sure what's happening there. I haven't experienced what you're describing. I test mounted a few different boot sizes when making the template and they all end up in the center of the 30mm adjustment range when mounted. Is it possible that the BSL stamped on your boot is not accurate?
Edit:
Also, if your adjustment is within the 30mm range, then the brakes are going to be on the track as designed. Probably do need some photos to understand what you're observing.
-
12-21-2018, 01:24 PM #1335
-
12-23-2018, 11:36 AM #1336Registered User
- Join Date
- Jan 2012
- Posts
- 37
-
12-23-2018, 05:22 PM #1337
hmm - never had this problem before with a template. All dimensions verify except for the BSL. Joined the two halves together on the 315 BSL line, and toe line to heel line measures 286?
https://goo.gl/cDzYZSReligion Is Poison
-
12-23-2018, 09:25 PM #1338
-
12-23-2018, 09:52 PM #1339
-
12-24-2018, 07:34 AM #1340Registered User
- Join Date
- Oct 2003
- Posts
- 79
-
12-24-2018, 07:34 AM #1341
-
12-28-2018, 10:46 PM #1342
Thanks - I did mount the Shifts tonight, and your revised template looks good.
Religion Is Poison
-
12-29-2018, 12:24 AM #1343
Can somebody guide me to the correct paper template for some older Rossi axiom scratch 200 bindings. I’m not sure which look template to use. Thanks
Sent from my SPH-L710 using TGR Forums mobile app
-
12-29-2018, 05:42 PM #1344
-
01-02-2019, 02:03 PM #1345Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,546
Anyone got a lead on marker alpinist?
-
01-05-2019, 03:11 PM #1346Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,546
-
01-06-2019, 04:06 AM #1347
It's basically a Kingpin as it uses the same toe holes and two of the four heel holes with another two needed. Not in my shop at the mo so and can't recall if the tow heel holes it uses are the forward or rear ones.
If you PM me your bsl and your email address I'll make you a template and scan/email it to you.
-
01-06-2019, 04:08 AM #1348
Haven't checked this full thread but has anyone got a template for the Salomon MTN tech binding?
-
01-06-2019, 05:07 AM #1349Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
01-06-2019, 09:54 AM #1350
Woohoo. Cheers, Terry
Bookmarks