Binding Mount Paper Templates

[LeeC]

After printing and looking at the double sheets, I am going to guess, that you take off the excess paper on both sheets of paper, line up the bottom, or the top to correspond with your bsl, and that should be your template..Is this correct?
Lee

[MESKIBUM]

Any for Head or Tyrolia? My local shop is going nuts trying to figure out how to mount my Mojo 15's to the Praxis Pow's. They don't see "narrow ass snowboards" very often and don't want to buy a jig. I could make one, if I had a paper template.

[Ed el Loco]

Any one know if this:
look_paper_template_R1.pdf matches Axial2 jig
is any thing close to a Look Nova 10 Lifter?

[LeeC]

After printing and looking at the double sheets, I am going to guess, that you take off the excess paper on both sheets of paper, line up the bottom, or the top to correspond with your bsl, and that should be your template..Is this correct?
Lee

It is not correct, and I have figured in out with help from jondrums

Match toe bsl to mount line, than match heel bsl to mountline..My bad
I was overlapping the sheets to correspond with bsl

Thanks jondrums

[samhop]

Thanks for the heads up. Just to clarify, was the BCL spot on based on the toe location? I think the just scale on the heelpiece BCL might be messed up, I'll take a closer look. I have FKS sitting in a box at home, so I can test this one sometime soon.

thanks to everyone vary helpful having all this in one place.
sorry to be so long getting back on this jondroms.
yes the toe is good template 315 to 315 bsl boot and therefor i don't think the heal is a printer scaling issue.
i use 335mm on the fks heal template to mount 315 bsl that is a move of 1cm actual 2 on the template numeric scale. so i think the numeric scale on the template is correct at 1/2 true size it needs to be moved back 1cm.

[MESKIBUM]

No one has one for the Head Mojo's? I need to make one to accomodate the 130mm brakes. Fingers crossed.............

[pechelman]

does anyone have a duke template that i can print on one sheet of 11x17?

if so please email it to me at pechelman AT gmail DOT com

[cowdog]

does anyone have a duke template that i can print on one sheet of 11x17?

if so please email it to me at pechelman AT gmail DOT com

... and to cowdog. email is skimontana AT gmail DOT com

Many thanks!!

[cinnepa]

another bump for the head mojo 15's

[MESKIBUM]

another bump for the head mojo 15's

Still nothing? It's as if no one has these.

[butterscotch]

wow. missed this somehow. can't wait to not pay $50 to have skis mounted...

jondrums for president.

[yellofin]

I also could use a small duke template my email is arsfishco@aol, Thanks ahead of time

[jondrums]

Still nothing? It's as if no one has these.

if anyone has a mojo jig or existing paper template for any BSL, I'll make a paper template for it.

I also could use a small duke template my email is arsfishco@aol, Thanks ahead of time

check the first page, it has a template for both large and small

[enzo3366]

Anyone have measurements for the heel of the px/axial race versions? The mount pattern is shorter than the lower din versions.

[MESKIBUM]

Nevermind.......props to my local ski shop..Berger's in Binghamton for figuring it out. Clever guys they are. Can't wait to have a reason to get on these!!