Results 1 to 5 of 5
Thread: 916 versus Duke pattern
-
12-17-2008, 03:32 PM #1
916 versus Duke pattern
I have tried searching, and not found much. What I want to know is if its possible to mount a duke on a ski already drilled for 916s.
-
12-17-2008, 03:33 PM #2
I would love to know this info as well for FKS vs. Duke though
Before big games I shoot Rabies, it gives me the edge I need and it’s undetectable. Only idiot losers do steroids anymore...
-
12-18-2008, 02:02 AM #3
what bsl? it looks like it is entirely dependent on the bsl of your solly mount since dukes have a fixed length between front n rear holes. i have a solly and a duke plexi template for my 325 bsl. For a size small Duke it would appear that you would have to cheat forward just 1 maybe 2mm for the recommended 1cm clearance for frontmost holes with no problems on the rear spacing. For a large duke its either 8mm forward or 16mm back for conflicts on both front and rear.
-
12-18-2008, 02:14 AM #4
Well the sticks I'm looking at have solly holes for 328mm. But also toe holes at 312mm (so back about 15mm). My dukes are small (my boots are 301mm). Trying to work out if I'm going to have probs before I buy em...
Seems like the toe area is going to be awfully crowed for holes, bummerLast edited by JimLad; 12-18-2008 at 02:17 AM.
-
12-18-2008, 02:15 AM #5
What he said ^ I've done it, had to move a little back.
Bookmarks