Results 1,201 to 1,225 of 4154
Thread: Maggot snowmobile thread
-
01-17-2013, 04:09 PM #1201
Mount the cfr rack near the back of the tunnel. I've seen enough photos to convince me to do the same. I don't have the DD system i have just the metal brackets
-
01-17-2013, 04:59 PM #1202
I'd suggest installing the seat first and placing the rack as close to the front as you can without interfering too much with your feet. With two pairs of skis, a gas can or something in the rack and two people reducing the suspension travel a bent tunnel is a possibility with the rack right at the back if you end up on any whooped out access trails.
-
01-24-2013, 06:48 PM #1203Bounding for the outs.
- Join Date
- Jul 2007
- Location
- End of the line.
- Posts
- 238
-
01-25-2013, 03:08 PM #1204pura vida
- Join Date
- Mar 2006
- Location
- The bottom of LCC
- Posts
- 5,750
Selling my '10 M8 SnoPro 162. Low miles, lots of upgrades.
http://www.ksl.com/index.php?nid=218...854570&cat=146
-
01-30-2013, 08:09 PM #1205Bounding for the outs.
- Join Date
- Jul 2007
- Location
- End of the line.
- Posts
- 238
-
01-30-2013, 11:34 PM #1206
-
01-31-2013, 12:36 AM #1207
Thinking about selling my 2005 M7 with 162 inch track. Engine is stock minus an aftermarket can. 27xx miles with a couple hundred miles on a fresh top end. Snow eliminator boards, bar risers, and vented sides. located in the Colorado Front Range. Thinking $3800 with the 2-place trailer. Fun machine but I have decided to be more mobile so I am lightening my load.
-
02-02-2013, 10:48 AM #1208
I am at wits end with my machine. It just won't run right. I need help. Its an 07 RMK 600, carbed.
It has, new top end, new clutch springs, new carb boots, new plugs, jetting is dialed, slp pipe and can, blah blah, it is perfect. Except:
I can run the machine up to about 7k rpm if I ease into the throttle, but any time Ilay into it (to the bar) the machine will just fall on its face and stumble at about 5500 rpm. It works great up to about 3/4 throttle, then nothing.
I've checked everything. I'm going to recheck power valves tonight, but those were fine. Plugs are cardboard brown, a bit rich at idle.
I'm at a total loss.
-
02-03-2013, 09:57 PM #1209Registered User
- Join Date
- Oct 2009
- Location
- invermere
- Posts
- 909
-
02-03-2013, 10:35 PM #1210
-
02-04-2013, 10:33 AM #1211
pano-dude, are you on snowandmud.com. I'm sure some one has been thru his prob before.
plugs are brown? sounds lean? is it jetted for high mtn riding or lower elevation? that tricks people.
check fuel lines and replace filter as I'm thinking its starving for fuel so becareful coz if its running lean your headed for a squeek.
butt wot wood eye no ...We, the RATBAGGERS, formally axcept our duty is to trigger avalaches on all skiers ...
-
02-04-2013, 10:44 AM #1212
A little stoke from the weekend before last...
-
02-04-2013, 11:23 AM #1213pura vida
- Join Date
- Mar 2006
- Location
- The bottom of LCC
- Posts
- 5,750
Hopefully 6 grand in my pocket.
Thinking about getting out of sledding. Just haven't been that into it lately. Although I did take it out yesterday and had a damn good time. I'm just not sure I can justify it for the handful of times I've been taking it out per season lately.
-
02-04-2013, 05:08 PM #1214
Well quit being a dwid and ride more. I need answers when I call you in the next few days and say "hey D, what's up! Tahoe sucks donkey right now so I'm coming your way for some BC skiing. Where we goin?"
See? You're going to need an answer. An answer that doesn't involve the 5 million person highway skintracks that utah calls "backcountry skiing".Besides the comet that killed the dinosaurs nothing has destroyed a species faster than entitled white people.-ajp
-
02-04-2013, 06:29 PM #1215
So, Yakima is making Sledbeds now?
-
02-04-2013, 06:50 PM #1216
Rides13k pimped out, wrapped, mostly modded polaris pro on snow.
Drives 2k toyota tercel on pavement.
Radical.Last edited by kidwoo; 02-07-2013 at 02:24 PM.
Besides the comet that killed the dinosaurs nothing has destroyed a species faster than entitled white people.-ajp
-
02-07-2013, 01:18 AM #1217
Fuuuck, sled started acting crazy Monday, sputtering and misfiring. Took it in, 5 hrs later they tell me the ECU is fried. Charging me 75 bones an hr+ parts. Seems a bit steep... It's a 2008 M8, pretty bummed as Ive heard these things are bullet proof.
-
02-12-2013, 12:18 AM #1218
sux
Are you sure its not a polaris? Never heard of a cat frying the ecu. Hope you get it going soon.
-
02-13-2013, 07:01 PM #1219
FYI my buddy just totaled his 2011 RMK assault. All frame and tunnel damage. The engine and 90% of everything else is mint. I think the insurance lets you buy it for cheap.
Let me know if you need anything or if you have a chassy for sale
-
02-13-2013, 07:03 PM #1220
-
02-13-2013, 07:24 PM #1221
skidoo charges $100 an hour here ...
but 5 hours to work that shit out ???We, the RATBAGGERS, formally axcept our duty is to trigger avalaches on all skiers ...
-
02-14-2013, 02:13 AM #1222
-
02-14-2013, 01:03 PM #1223
-
02-14-2013, 07:48 PM #1224www.skevikskis.com Check em out!
-
02-14-2013, 08:45 PM #1225
Picked up a basically new rmk dragon 700 and proceeded to burn up the clutch and a belt on the first ride up Taylors fork. Shit sat up there for a week but I got that mofo out and worked on (not a big deal, a primary clutch bushing). Ready to rip again.
If anyone in the Gallatin and surrounding area wants to sled or sled/ski, hit me up
Bookmarks