Which holes don't seem to match up, and what model year? I recall that the 4.5 DIN junior bindings took the junior 94 jig, but that the 7.5 DINs use 92 adult jig, same as Attacks, Mojos, etc. The...

324529

Read one page back and you shall find what you seek

For the older version just use the jester template on the first page of this thread, the extra schizo hole should be the same as the demo. For more recent demos, lucknau posted a template back on...

Try the Marker M-Series template about halfway down here

Slidewright's binding template page has a link to Knut's google drive for all templates. The Tyrolia template is the last one at the bottom.

I'd offer to test it once you make the changes, but I...

Yeah there have been known issues with the tyrolia template in this thread for some time now. It's been a while since I used it last but I think the jigarex tyrolia plate is off by the same amount...

The Powderguide template is much more accurate in terms of getting your boot center correct. Use that one. But still do a test mount to tweak if necessary. I just tested the same thing you did...

No worries, only concern is where you end up relative to the ski's boot center -- pattern is spot on. Make sure to report back in this thread

doebedoe is correct, it's the same pattern as the first gen Attacks, Peak/Mojo, etc. Just use the tyrolia template in this thread. Make especially sure that you do a test mount with the Tyrolia...

I think 305, but you could print the paper template from the first page of this thread and place it over your existing holes to compare with the center line and see what BSL they were mounted at

Ahh gotcha, that makes sense. Yes the new Jester demo jig has a different part number.

Here's a stock photo of the Jester jig from 2018. Doesn't show a second set of holes on toe or heel to differentiate between old and new patterns:

248606

I'd be surprised that if the pattern...

What has changed? As I understand it, the 2017 and later models have a different AFD to fit touring boots as well, but did not know the mounting pattern changed with it. Have not had a newer pair...

Bonafides have metal, so you should be using a 4.1 mm bit. Also should tap with a 12AB tap. With Blizzards, I don't think they show any drill bit info on the topsheet, but usually mark on the...

^^^

This. The tyrolia template is what you'll want to use.

Use caution with that template though. As mentioned a few pages back, and confirmed by a few others recently as well, be sure to do...

You asked how to check/change the print scale, which can be easily found via a quick Google search (as well as the first post of this thread and many more times throughout). You also confirmed that...

So people here try to help you with what is a rather elementary question, you then respond with sarcasm, and then ask another [what some would call stupid] question? And what's with the recent trend...

Just use the FKS paper template from this thread. However, since you seem unable or unwilling to bother looking at the templates to determine whether either template you mentioned matches your...

Just a heads up on the Tyrolia template, and this was first mentioned a few years ago in post #788, but the template seems to put you in front of the line, at least for smaller boots. Mounted a pair...

Jon, about two years ago I saved the .PDFs of all of the alpine templates as well as both Duke templates that I'd be happy to send back over to you. Revision numbers are still saved as part of the...