After reading all the responses (thanks for the feed back) I think my plan is as follows

Remove the heals, use a two part epoxy, gently try and find the starting point of the existing threads by...

I haven’t taken it off yet but when I remounted the heal the first time the screws went in tight with no issues. Yes, I can use the same screws or new ones if that was better.

There is no metal in...

I have a question that I am sure has been asked but I can’t find the answer to.

How many times can I remove a binding and reinstall in the same holes before the mount becomes compromised?

I...

Yeah I don’t want that to happen. Never thought of it that way….
You think the same for the 120s? Go with 110s?

Ok, so it sounds like the 110 brakes for the 102's...Thanks!

I am looking at mounting Attacks on two pairs of skis. This will be my time with Attacks. My first question is brake size. One ski is a 102 and the other is a 120, Brake options are 95, 110 and 130....

I think the rule of thumb is 8mm center to center is safe. I just moved some bindings around and spent a bunch of (unnecessary) time worrying about a few mm front/back. I went 1cm to be on the safe...

Thanks. I get a little worried on third mounts...

Thanks. That centerline was just a swag and is off for sure. I was looking at rough hole placement to see if it was even worth spending time on it.

Sorry meant to reply with quotes

Bumping to see if anyone has thoughts on the hole placements? Should I be ok?

Bumping to see if anyone has thoughts on the hole placements? Should I be ok?

Thanks!

They are. Lots of fun to ski. I haven used them lately, looking to get back on them.

Is that 6cm forward or back from boot center or ski center?

I pulled the shifts off the skis and this is what I have. If I move forward 2cm from boot center this is were the new holes will be (pivot 15s)

Should I have any concerns on hole placement or the...

So I am trying to shuffle some gear around, there is a reason to my madness.
I have a pair of skis that have two mounts both for 306 bsl. The first was a pair of Jesters that were not GW compatible,...

Unless I am missing something, what I find interesting in these two pics is that the white indicator tab didn’t seem to move even though you adjusted 2 or 3 turns...

I picked up some BSI (Bob Smith Industry) slow cure. I don’t have any long term experience with it. Is it any good?

Great thanks, I would have tried running the tap all the way down.

Greg if I understand this right, I would only tap the first few threads, just enough to clear the top coat to the start of the core is that right?

I am looking for a 12AB tap can you get then at local HW stores or only online? Also am I correct in assuming you can use the tap regardless of the hole being 3.5 or 4.1?

Once again thanks for the pic.

I was looking more closely at this and had a question. The heal which I assume from the pivot hole pattern is on the right side of the picture seems like it is much...

Yea. That is exactly what I need to do. I only got a few runs on the BGs last year before everything went to crap and those were not on conditions they were meant to be skied on. Like I mentioned I...

Ok makes sense with the glue, I had been thinking about it the wrong way. I was thinking I needed something super strong but what I am really looking for is something that is water proof and won’t...

On a different note. I am not new at being a hack at playing around with mounting bindings but I am new at doing it right, very new. That said I have been taking feedback you all have provided in...

Thanks for the info guys! So I am thinking if I do this I would go back the 5mm all though going forward looks like it would give me some additional clearance. I think I need to rethink this, not...

Ok so sounds like I need to move 5 to 10 mm depending on which way. These are billy goats with RES so

1. Which why is better forward or back?
2. Or should I just say f it and stick with the...

Not sure of this has been asked but I mounted a new shift binding an a new ski and have changed my mind. I want to put pivot 15s on with the CAST setup. I have a 306 bsl. What if any challenges will...

Don’t know how I reposted.

Good deal...I have one last question. When resealing the the screws in the holes what do you guys recommend.. I have seen some folks say gorilla glue and I have see...

Good deal...I have one last question. When resealing the the screws in the holes what do you guys recommend.. I have seen some folks say gorilla glue and I have see folks say don’t use ...

Guys. I have a question that i am sure is “Mount Your Own Fucking Skis 101” but still need to ask.

How many times can you remove binding mounting screws and put them back in the same holes before...