Nuts fucker!
I wouldn't pay $.85 for those

They were fun....
But I never, and I mean ever, want to see them strapped to my feet again---fuck LBD

I sold Swerve some unmounted 223 Volkl P10's a few years back. Super tuned them, hot boxed the fuck out of them, Dibloc and wet jet and then they sat in the fukin closet. Hope he's using them.
Had a...

That's because Explorer has 8.8 too. You can also retro fit Explorer rear disc brakes onto your Bronco as well.

FTR, I epoxy as well and just pop plugs in mostly. It's definitely better than glue, but either way I believe some sort of adhesive should be used because plugs can leak too. Not every hole being...

Epoxy doesn't necessarily stick to poly all that well really(any glue for that matter) without prep. Especially shiny plastic. I'm guessing nobody preps plugz

He's a great dude actually.
I consider the dude a good friend.
I know nothing about it really, other than he bought a bunch of land up there.

1 hand

I know who it is.
It's a private snowcat.

^Yep, what he said

You can
On a machine, edges need beveling before they are run on the stone. Stone+metal=nõ bueño

Guardians use a removable axle pin. Maybe, if nothing else can be done, it can be retrofit.

I'd hit up that shop 1st tho.

Pretzel is right. My Woodsies were good, but I've had more than one brand new ON3P w/ wonky factory tune. Edges want to engage even going straight.
Sux to have to retune. Really your edges need...

Yep
$$$$$

I'm 6'2" 220 and bought 187 proto Woodsies(stiff build, but mainly bought because less sidecut and less taper, which was more important to me than 5xtra cms).
They are literally brainless to ski, so...

That pic of Girardelli he's skiing 90's.
SX 91s were red w/white.
92s came in white and black, then orange and black.
I'm still rockin the 1st gen 3-peice boot that followed(25 yrs tele kept 'em...

Gold Maven is a timeless gem. Still ski them quite a bit. FaF on anything soft, including corn-mank

Choices: Get that shit welded @ local shop. Ski
Trim off loose hangers. Ski the fuck out of them. Immediately dry skis and take them inside when you get home/to lodging. Repair @ home.
Ptex repair...

Epoxy base material instead...done deal

Yeah.
Even then, you still need good contact and caulk only expands/contracts 2 dimensionally.

I'm betting your drywall is deflecting. Put screws into studs an 1" above backsplash. At the counter to backsplash joint, use pure silicone(never silicone caulk a painted joint). Backer rod that...

Let dry
Remove any loose, bubbled or damaged material.
Sand.
Patch surfaces w/ appropriate fillers
Sand and prime fillers.
Repaint.
Before doing all that^^ tho, fix that damn caulk seam.
...

Brother and I have both had great experience with LTX.
Brother got 80k out of a set he fastidiously rotated and had flipped once on the rim.
One thing I like about them is the siping. Sipes go all...

I tried

354499Yep. Repair your own fucking edge compression thread should cover it.

Against the edge you're gonna need metal grip or....

do as this dude says and you basically just have a die cut base. Way more bombproof too

I bought my Woodsman from CallMeAl.
I let my brother use them last year.
1 run and the dude skis up w/ a pondering look on his face and says " These are the easiest skiing skis I've ever been...

Fuck, black based Caylors!
Want!

I have.
Just reset the bevels.
Hooky can maybe be detuned out. My SG's were railed, as in edges always felt like they want to engage, even going straight. My Caylors had slight hooky, but it skied...

Rubber tape(aka VDS) between edge and core/laminate.

Don't overthink it brother!. Remove w/ sharp chisel. Those 'keys' are epoxy. You'll create new ones upon layup. Don't waste your time with screws.. Besides, to try and use existing keys is gonna...

Who cares about the tabs? Is the edge itself the same thickness?
Try WSD, Hinterland or any other local manufacturer.
I've got some ON3P edge material. Gonna be way thicker though, meaning more...

Just something about Head.
Same reason I was able to score my fav ski ever for $150 shipped brand new

Should be stored @ room temps ~70°F(21°C). By temperature differential I mean if I was to store it in the garage here where it's over 100f in summer and can get to 0 temps in winter.
Heat gunnit!

Yeah, I talking about storage for people who aren't in a shop environment that use their epoxy intermittently.
Air, temperature differential and light will kill your epoxy. Properly stored, the...

Lone Pine Gear Exchange is the dude that started second tracks

I've bought 2 sets of skis from N on 2 separate occasions. Dudes solid!

Fundamental storage issue.
First off-- don't cut the dispensing spout, just remove lids for dispensing.
For storage:
Squeeze bottle till component is @ the rim. Take inner seal and...

Concerning G-flex
Squeeze the air out of the a & b containers put inner lid back(instead of chucking), screw cap snuggly and store in cool dry place. Less light the better too

Gotcha.

I get the fun AF part, but not supportive? That's not an issue, I'd DD the fuck out of them if I can get them to glide better! They ski fine, slow on flats, brutal on traverses and this...

^^ check out 'It's Easy(like walkin')by The Sadie's. Bad ass tune dood!

Love Kurt Vile man. He has a duet w/ JP on that EP too.

^^^i was gonna say I was thinking of mounting mine -7 or -8, so 7.5 sounds good to me

So Caylors are/were softer than current Jeff's? Or the main difference is more rocker, less camber?
Caylors are the funnest ski I think I've ever been on. Makes one start scanning features and...

PB's aren't one truck pony. Just gotta stand on 'em and ski the center. You must've tried driving tips and engaged the rev sidecut, which is no bueño.
I have no thoughts on BG models as I've only...

Dampness actually comes from moisture----just sayin'
Also plastics, of which, resin is a part of

Yeah, that was what struck me, "damn those binding look far back..."

Hone them with your sharpening stones. If it's super dull, take it to grinder, go slow.

Metal in skis is overrated, cept racing.
Rubber and plastic have more affect on damping.

Sharpen/hone that 3.5.