I have some old 191 full camber Mantra’s that failed to sell at Buck hill a couple of weeks ago. Mounted with some Salomon S912 binders. Free to anyone who wants em


Sent from my iPhone using...

As a fellow 128 owner, I don’t know what I would replace it with. It feels like it balances everything I want in a car so well. 7th grader? Can you get by with the Land Cruiser until they are...

More fun with my bmw 128i. The starter went out 3 weeks ago and due to a long string of travel I just got a chance to get it swapped.

It is buried under the intake manifold which is a complicated...

After a ton of work a few weeks back doing oil pan gasket, motor and trans mounts on my 128, the drivetrain developed a vibration while under load. I found a rear u-joint that was notchy and stiff....

The coverage of that sprint run in was one of the best things I have seen in a long time. It was spectacular.


Sent from my iPhone using TGR Forums

Anybody want these? Free to a good home. You pay shipping


Sent from my iPhone using TGR Forums

I just finished redoing my 16 yo cedar deck by running all the boards through a planer. Basically took it all apart, skimmed off the old weathered surface and re-stained it before putting it back...

I decided to tackle the oil pan gasket on my 128i this weekend. It has had seepage for years and I thought it would be nice to have things stay a bit cleaner down below. Overall the job has went well...

I refurb’d a pair last year. New brakes fit just fine. I got new pedestals and afd’s to allow GW usage. A seller on this site had a bunch available. I took the heals apart too to clean out all the...

I took on the job of refinishing the rear subframe of my 128i. Some rust had set in and the paint was failing in several places. Basically the whole rear end was dropped out and disassembled. I had...

My first time going under the knife they missed a bit with the injection. I didn’t know exactly what to expect and was waiting for things to go numb. They started to wheel me in and I was like “...

Be careful and stay ahead of the pain meds as that wears off. It can be pretty rough if you wait too long


Sent from my iPhone using TGR Forums

Sorry to hear that SnowShow. A year ago I was with my 15 yo daughter when she slipped in the parking lot at Bridger and dislocated her right knee. This was after spending 4 months rehabbing her left...

I got out for what likely will be the last “Wisconsin Wednesday” at Granite Peak for the year. The recent snow->rain->freezing temps made for some interesting conditions but it is still better than...

Pierce Skate and Ski in Bloomington MN ordered me some.


Sent from my iPhone using TGR Forums

I got some of the Costco heated socks last week. I was a little concerned about the thickness around the toe and they felt a little strange when I first tried them on around the house.

Had them...

487780487781

Got some after work turns in during another business trip to Wausau. Daytime temps were over 50 but things were stetting up pretty firm after dark. Glad to be on my monsters

...

Got some after work skiing in tonight. 485975



Sent from my iPhone using TGR Forums485976

I would really like to get to one of these meet-ups. Keep the stoke rolling!


Sent from my iPhone using TGR Forums

I’m in WI for the first part of the week and was able to get out to Granite Peak after work today. Less snow today than I was hoping for but it was still fun.
482360

Had a coworker join me and...

I put some FKS155 bodies on new GW pedestals and had some interference. The new pedestals had some casting flash that needed cleaned up before they would work.




Sent from my iPhone using TGR...

You missed granite peak



Sent from my iPhone using TGR Forums

I should add that I have a stone on the bottom rack of the oven and try to do a 30 min plus preheat with the combo cooker in the oven


Sent from my iPhone using TGR Forums

I’ve been going 25 min at 425 with lid and then an additional 10+ without until it is the right color. All done in the convection roast setting on my oven


Sent from my iPhone using TGR Forums

I’ve been trying to get my bread baking mojo back. It is hard with the amount of travel I do. I was happy with this one480528


Sent from my iPhone using TGR Forums

I have been wearing mine pretty much daily since it arrived. These are great.

At 6’3” 210 the large is a great casual fit. Sleeves are long enough to cover my 6-6 wingspan


Sent from my...

https://porlolomusic.bandcamp.com/track/christmas-in-hollis?from=embed



Sent from my iPhone using TGR Forums

The tool rolls were too soft and floppy initially. Waxing the fabric added structure and hold the wrenches just the right amount. I really haven’t done much sewing before. These were a simple...

Broke out the sewing machine this weekend to make some tool rolls. Grabbed fabric from some old pants and waxed them afterwards. I like how they turned out.

479024


Sent from my iPhone using...

I got a set from Pierce Ski in Minneapolis. They ordered them for me along with the dual compound risers


Sent from my iPhone using TGR Forums

My skillet was kind of a mess and I was bored. I have an old Wagner Dutch oven that I got from my grandmother. The inside is shiny smooth and it is a joy to use. I thought it was worth a try and I’m...

My skillet was kind of a mess and I was bored. I have an old Wagner Dutch oven that I got from my grandmother. The inside is shiny smooth and it is a joy to use. I thought it was worth a try and I’m...

Angle grinder with an 80 grit flap disk to start, then move to a 120 grit. finishes up with a random orbital with something a bit finer.


Sent from my iPhone using TGR Forums

I started over with mine last year. Spent time with a couple of flap discs and a sander to get down to a smooth surface and then re-seasoned. I love the way it turned out.

It started out a cool...

Always a fun time of year looking for bargains.

Hit up the Buck hill swap this afternoon and got a pair of 186 Brahma’s with some attack 13 binders for $50. They need some work but worth it for...

I was flying into Heathrow about 5 years ago and customs was a mess. The maze is full and they had only one agent processing foreign entries. After about an hour wait with little progress and a...

Ode Gen2 isn’t messy at all. The anti static device works really well




Sent from my iPhone using TGR Forums

Is there an order link up now?


Sent from my iPhone using TGR Forums

I’m going to need to do this some day.


Sent from my iPhone using TGR Forums

Had the driver side door lock actuator fail on my 128i a few weeks ago. The internal gear broke so it only locked with the key directly. It is a shared part with the 3 series so there are a lot of...

I am pretty sure mine is on it’s original pump with over 175k miles on it. Hoping I get a warning like you did before it gives up.


Sent from my iPhone using TGR Forums

I am pretty sure mine is on it’s original pump with over 175k miles on it. Hoping I get a warning like you did before it gives up.


Sent from my iPhone using TGR Forums

Was the water pump replacement done as a preemptive strike or had it failed?


Sent from my iPhone using TGR Forums

Replaced the crank position sensor on my 128i this weekend. Not a real fun job. You have to remove the air cleaner assembly and snake your arm under the intake to get to it. You can see it from...

I feel you on that. I did mine a couple of years ago and they were a bear.


Sent from my iPhone using TGR Forums

I was going to ask about Bridger vs Big Sky for snow tomorrow but my daughter slipped and dislocated her knee in the parking lot this AM. Bummed to be missing out


Sent from my iPhone using...

Nice. What tires did you go with?


Sent from my iPhone using TGR Forums

I wouldn’t consider that an upgrade…


Sent from my iPhone using TGR Forums

451415 more 128i content. No problems hauling skis.


Sent from my iPhone using TGR Forums

No worries. This group is from the town in Indiana I went to HS. Similar approach to ski apparel. Happened to see this at Granite Peak on a random Wednesday. Long ways from home on a weekday...