Screws are sold to the above fellows. Liners are still available.

P12 sold to jackattack. Thanks for the smooth sale!

Epoxy may not provide enough pull-out retention, so I would suggest cutting up some very small pieces of fiberglass fibers or steel wool (3mm length or so) and mixing it in with a high-quality,...

Time for another cleanout of accumulated gear:

1. Intuition Dreamliner 24.0 MV, skied under 5 times, never molded, and they are pretty minty with no signs of use. Wasn't the right liner for my...

Agreed, I have the 179 Wren 96 and also think the shape is perfect for shallow touring. A slightly lighter layup and tad softer tails would make them an awesome tight couloir and mountaineering ski....

I have 16 or 17 tour-layup C&D 183s (pre asym design) and they do indeed pivot and slarve super easily. In fact, I love skiing trees with them when the snow is soft. For reference, my next longest...

I have a pending full price offer with no shipping, so I'll keep you posted.

These are the "turny" version of the Wrens. I can carve awesome arcs on the 176s, very similar sidecut as 2013/2014 Viciks.

Long story short, I bought some 176cm Wren 102 for the wife and I dig them more than she does, so I'm selling my NEW 181cm Wren 102s. Never drilled or mounted and I'm not making a cent on these....

Not exactly, these are the FT model which are $343 at Snowinn (plus shipping) and $454 at Backcountry with free shipping. My price is $380 OBO for barely-used. Feel free to make me a reasonable based...

I ran the ATMs on my 08 Tacoma while living the Seattle area and they were a great compromise between dry/wet road manners and off-road and snow capability. They were very quiet and smooth-running...

SOLD SOLD SOLD

Yes, I'd have gone with the K02s had they been available. They make the Revo 2 seem very pedestrian in comparison.

My lady is 5'6" and rides a small 2014 Troy, but it's barely big enough. I'm 5'8" and rode a medium 2015 around Moab for a few days and found that the fit was good the the stock (50mm?) stem, but a...

Bump. I now have a set of Dynafit Radical FT 2.0 with 115mm brake that would mount in the existing holes for a 27.0 boot on the "all-mountain line." I'd do a package deal for $475 + ship.
...

Photo added. Nary a mark from use.

I also have a 115mm brake from another set of lightly used Radicals that I can swap in

I also have some Rossi Super 7s (180cm) for sale that are drilled for...

I got about 5 years and 70k miles on Dynapro ATMS before I decided they were too worn for deep snow. Great tire for my 08' Tacoma in the factory 245/70/16 tire size. Now Running Bridgestone Revo 2s...

I'll piggyback on this listing; I have a set of Binding Freedom screws (for inserts) for Guardians that the buyer might want. $10 shipped.

One pair of Dynafit Radical FT 2.0 with 105mm brake. Used 5-8 times or so for some soft snow AK backcountry, so they have very few marks from use. I'm always very careful with my gear. I switched...

PAYMENT SENT. Thanks Jim.

Yes, the Fischer factory rings a bell. The finish on this year's Punishers is very good based on my fondling in the local shop.

Well, for what it's worth I have a pair of 2009 Scott Punishers (89mm waist) that just won't die. The construction is top-notch and they must be made in an upper-end Euro factory, but I still stay...

Exactly what SooL said. It's not a problem specific to tele by any means.

I experienced this phenomenon big time with the original Rossi S7s and to a lesser extent with Armada TSTs. It was...

Look PX/SPX and Rossi Axial2/Axial3 are a piece of cake with easy-to-swap brakes. Look Pivot and Rossi FKS are also quick to swap minus the brakes which require unscrewing the heel piece struts.

The running length of a 179 Wren 108 or 98 is similar to that of a BG 186, if not a smidge longer. The new 179cm length for Wrenegades should be spot-on for a DD as they have a fairly "traditional"...

Rocker profile pics added for both camber and de-cambered skis.

Sure thing, I'll update the listing tonight.

Thanks guys, I'll stick with G-Flex because I think it has a stronger bond than Hardman Orange. The 8-oz bottles (Part A&B) of G-Flex will do approximately 867 inserts :)

I should note that I've...

Bumparoo, still available to ship from AK or I can deliver in the Boulder/Denver area on April 28.

Just back from an interesting trip to the Sierras. Skied my 12/13 Viciks and 16/17 Billy Goats in everything from refrozen mank to wind-consolidated powder and sun-baked mashed potatoes. Viciks were...

ON3P Wrenegade 98 in 186cm should be about right for your needs if you like a ski with a more rearward mount. It's also fairly similar in type to the three skis you listed; all are directional,...

It's unlikely that there's a true need to wage chemical warfare against your boots without first trying something simple like soap and water. Also, you seem to indicate that your boots have never...

thanks to the following standup sellers:
DKNY2LA - quickly sent me 4 goggle lenses for the price of beer money!
ILL_JONG_KIM - Send me tons of photos measurements and details on two pairs of skis...

I have one with a dodgy on-off switch that I reserve for practicing, but I'd part with it for $20 shipped.

I'm not going to apologize for being a little critical and perhaps condescending here, but have you ever heard of soap, water, and a little elbow grease? There's no reason to sterilize your...

SOLD SOLD SOLD
SOLLD

maybe a little silicone spray in the mechanism would do it, but definitely not as cool as pissing on your own boot. I've had the same issue with my original generation Cochise 120.

I'll take a mirror and the orange (RC-36?). I'm still rocking 3 pairs of Fuse goggles.

DAMN. So much wood it's almost NSFW!

I've never messed with the ON3P factory tunes except for on 1st and 2nd gen Billy Goats where I felt that the tips needed to be detuned to about 3-4" back from...

Beauty. Do you accept your courier fees in beer?

I'll take em and I'm in Anchorage so perhaps we can work something out to maximize your profit and my stoke!

Do you have a profile shot of those? I've never been able to find one and am interested in these sticks.

Any recommendations for plugging holes left by removed inserts? I'm thinking that finding the correct diameter hardwood dowel and use of a flexible epoxy (Hardman Double Bubble Orange or West...

For any interested buyers, I may have some 105mm brakes for these that I'd part with for $10 shipped.

EDIT: BRAKE SALE PENDING

Thanks guys. I'm in a 25.5 older cochise with multiple, but reasonable punches (mostly for width) and a low-volume Intuition Race FX liner. Not certain if I'd size up for the new Cochise/Zero G boot....

How does the sizing compare between 1st/2nd gen and 3rd gen boots?

The BSL for a given shell size is now smaller, leading me to wonder whether the shells and fit are smaller as well. 1st/2nd gen...

BCA Float 27 works well for my wife who is 5'6" and you might be able to find one clearance. the Float 22 had too small of a capacity and the 30 was too tall for her back.

PM's on liners

Thanks but not enough pop and I'm pretty set on a shorter length than 184.

Then I would require a pair of 179 Wrens for certain as I can only replace an ON3P with ON3P :cool: