^^^ try a different valve.

Some valves just don't play nice with some rims. And the gaskets on the valves sometimes get shitty over time and don't form a good seal with the rim.

Pretty easy actually. Just pull the picture up on the desktop, use your phone to take a picture of your screen, and post it with Tapatalk.
...

Same here. Here is a screen shot of a photo of El chup's shovel. Uploaded via tapatalk.

https://uploads.tapatalk-cdn.com/20240422/c4b8f5bed0865005dbb246de954ca9dc.jpg

Casing or knobs? I think maxxis measures at the knobs while some other brands measure at the casing.

I don't have any aggressors mounted up, but the dhf's, dhr2's, and assegais in my garage all...

Same in the U.S. In the 00's through maybe 2014 or so, I'd bet they were the 4th biggest brand in the country (behind trek, specialized, and giant), at least in terms of quality mountain bikes.
...

There's a local guy that has a big lifted pickup truck with a large American flag posted up on one corner of the bed, and a large rainbow flag on the other. A smattering of left leaning bumper...

In fairness to maxxis, it's not so much that maxxis runs small, it's that pretty much every other brand runs big.

Every maxxis tire I have measures very close to the stated size. Most of the...

The alternative is that shop rats take the bike out for a test ride to bed in the pads and spend 30 minutes farting around jumping off curbs. I'm sure for a big shop, it actually saves them money. ...

I think if it was just abrasive pads, you'd end up with linear scoring in the rotor. You'd need some oscillation to properly remove any glaze. Which means it'd realistically be easier to just slap...

Rim tape.

Holes like that are usually to let air escape the inner part of the rim during manufacturing.

Techbro probably broke the soap dish while banging in the shower and using it as a handle. Maybe new soap dish needs a higher load rating.

Wow. That's kinda more surprising that a lot of these bike companies going out of business. Colorado Cyclist has been around forever.

I'd say they run true to size for a Maxxis (meaning that a 2.3 aggressor is comparable to a 2.3 DHR2). Last time I measured one (which was a while ago), a 2.3 Aggressor measured about 56-57mm at the...

That sounds pretty damn awesome. Makes me wish I wasn't so far from a drivable winter bike destination.

Have you considered subcontracting your billing report spreadsheet work to Ranjan?

Yeah, a little digging shows they started in Canada in the late 90's. I definitely remember seeing some of their stuff in the early 00's. Looks like the Avid people bought it in '09.

I was trying to remember when Spot bikes was founded - seems like they've been around for a while. Looking at the website doesn't give me the answer, but it does say that the people who own Spot...

My non-tour deathwishes are fairly old at this point (they're the OG deathwish from 2013), so these days I have them set up with dynafits and just use them as early season rock touring skis.

But...

For those that have faded away from skiing as your primary winter activity, what else are you doing to keep yourself fit / happy / occupied during those cold, dark winter months? I still ski a fair...

Skied:

Praxis MVP
Praxis FRS
Dynastar LP105
HL FR110
Moment Deathwish
Moment Deathwish Tour
Volkl Kuro

I've got a used-but-in-good-shape Fox 36 Factory that I'd sell for $350+ship. Currently set at 150mm, but you could get a 160 air shaft for cheap. It's orange, and therefore fast. It's either a...

Tough to say exactly where the air is. Most likely in the lever. The air might be getting pushed into the reservoir when you pump the brakes up. Regardless, the solution is a full bleed.

Yeah, not showing people the geo chart is the most engineer-ish response to criticism of the geometry chart. Pretty funny, albeit a dumb move on their part that they ended up walking back pretty...

Kinda bummed about Pole. They were way ahead of the industry when they started - one of 2 or 3 companies that figured out where mountain bike geometry was going, 6 years before everyone else. But...

1) weed is illegal in Switzerland, and we had to go through the little customs gauntlet (where you don't have to stop, but you have to walk past the customs people), and they have dogs there. ...

The logo on mine is printed / painted.

eh, sorry. That's on me. Sometimes its hard to assume sarcasm when there's so many dumb takes.

Read further up a bit. This is what he wrote:

Kinda baffled why you think it's odd. This is a place designed specifically to discuss skiing. Skiing is inherently risky. There are three separate subforums in here for threads about...

I assumed he was just trolling to try to get this thread fired up again.

June 23, 2023 for me. Unless the thread is newer than that, in which case it goes to the first post. Only happens in tapatalk. Desktop is fine. Marking the forum as read in tapatalk didn't change...

You must be new here.

There's a 290 page thread about station wagons and 507 pages on the conundrum of what constitutes upstate NY. I'm sure we've got at least a few dozen more pages of risk...

The guys who built my previous house built a detached, fairly simple garage and then periodically parked their RV in it while they built the main house over the course of a couple years. Seems like...

An on topic question: last summer, a few friends and I were in France, where weed is illegal (I'm told). On a layover between trains, one friend went to a CBD shop next to the station and bought a...

It's funny - I just had a fresh demo bike show up today with shimano brakes. Wandering bite point right out of the box.

Plenty of brakes can develop air in the system even after a "perfect" bleed that purges all air. Air can work its way in past seals. It's why shimanos develop their notorious wandering bite point...

The partial bleeds are nice sometimes because, more often than not, if a little air works it's way into the system, it's at the lever end. So you can just open up the port on the lever and get the...

I'm sure that syndicate method works fine for getting bubbles out, but it's messy as fuck.

A Sram bleed takes half as long, I don't have to unbolt the caliper, and I don't have to pull the pads. ...

I've got Max for general TV/ movie watching, but it's still giving me sports (including bikes) for free. Not sure how long that'll last for. Once the free period ends, I'll probably end up paying...

Neither, really. I didn't want to die / get grievously injured before kids, and I still don't.

To the extent I've dialed back on risks, it's because I'm older and I'm aware that I'm not as...

Just finished season 4 of true detective. So yeah... agreed with comments above. It was pretty bad. Fairly underwhelmed with Jodie Foster. Agent Starling has gotten kinda shitty in her older...

We need a new thread discussing how much internet banter is too much when the guy on the other end pretty clearly has some sort of spectrum disorder.

Couple of tires and a jug of sealant
Tube(s)
Probably an extra rear shock
Extra chain + links
An extra rotor or two
Extra brake pads
Extra rear derailleur
An extra derailleur hanger if I have...

I dunno. Anything with a fast run in (particularly a run in that's all downhill) has a go / no go point that's actually pretty far from the take off. All it takes is some sticky snow after after...

But if the miscalculation on the road gap was a result of the snow being sticky, leading to an unexpectedly slow in-run, is there really any difference? Either way, it's an outside force that's...

Sure - different people get their kicks doing different things. That seems fairly self evident.

But this thread is about people that get their kicks from risk. And while nordic skiing /...

In this case, I think it's fair to say he's both wrong and an asshole.

Plenty of people, myself certainly included, are chasing that dopamine hit. It's a large part of the reason why I don't nordic ski or spend time on a gravel bike - there's no payoff; no endorphin...

A concentric BB places a suspension pivot around the bottom bracket.

An eccentric BB places the bottom bracket in an offset carrier which can be rotated, which can be used to tension the chain...

Yeah, my current bike has a concentric BB pivot. As did my bike before this one. And a couple others that I had before that. So apparently I'm not annoyed enough to stop buying them. But still,...