Have a pair of first gen attack demos that only work with Alpine soles, complete but without brakes which you'd need to fine. Can let go of cheap + shipping. DM me if interested.

@skibrd - what kind of hole pattern conflicts would exist with Cast binders..., sorry to ask this idiot question as I can probably dig for it, just don't have time today to go down the rabbit...

fack, need to resist blanks w/cast.... considering...

Thanks for the PSA @goldmember - got a pair of Raw P15's and a pair Attack2's applied the coupon which essentially covered shipping costs. This was a screaming deal... appreciated

Do any of you guys have access to Salomon spare parts or have some busted up sets of Warden 13s around. I found this part number L3947190001 in a 18/19 Salomon Parts catalog.

I have a cracked...

Not trying to create thread drift, but do any of you guys have access to Salomon spare parts or have some busted up sets of Warden 13s around. I have a cracked Warden toe section base plate (the...

Sold


Sent from my iPhone using TGR Forums

I know you are not looking for short-cuffs, but have some FTP XL w/short cuff if you want to consider - like these - https://www.freethepowder.com/collections/gloves/products/sx-pro-glove
comes...

I know right?

Pm incoming


Sent from my iPhone using TGR Forums

Would you separate skis and binders - don’t have to but adds lots to shipping cost? To confirm only the one mount correct (even with a boot switch)?


Sent from my iPhone using TGR Forums

Bump, it's snowing and cold again in the PNW - keep your gal warm...

Bump, open to a reasonable offer.....

Sold - Will add additional details but it’s a cool color, great feature set, and doesn’t look like a standard ski jacket. Wife really wanted to love it, but length was not too her liking, so went...

**SOLD**

Pains me to do this, but just can't get behind the color. Look these up but it's super well made and is a great fit for me at 6'3" around 215lb.

Bought an orange medium tall last...

One of the issues I faced in the past when trying to utilize old fleece pants under shells is the additional bulk of the waistband under either my ski pants or my pants/zip off bibs. So if you can...

I'll take the second set if still available. PM incoming...

Possibly have some 194 Enduro Carbons with Japanese Maple Veneer. Really like the skis, but may move on from them in January sometime as I have some other sticks in the bullpen to get mounted and...

regular inseam on the Bakers? thinking about them.....

sold ....

Resurrecting post before it goes to consignment or fleabay..... found the jacket after moving.....

They are not - posted the updates in the thread......

OK so finally had a chance to pop by the consignment shop - but with my 9 year old in tow so these photos are not complete cause he started complaining a lot...... Alas, no 202cm's lengths....
...

I've been able to find little used Folsom's in-expensive on the used market (here and elsewhere) to help conserve cash so I can still have a quiver, but keep my ever growing kids in gear so they can...

Shipped from Bend, OR

Still have but someone just reached out... Let me know via PM ASAP or I'll go to 2nd in line...

Sorry guys, was out of town today and couldn't get back to the shop early enough prior to close, will see if I can sneak out during the day tomorrow and confirm ski model, sizing, and mounts/current...

There is a pair of giant wide dps skis with touring binders (not sure why) at the local consignment shop - could facilitate a pick up and ship should I determine what size and model they are…. Let me...

What’s the bsl on the mount?


Sent from my iPhone using TGR Forums

K2 Indy skis with adjustable bindings for boot changes - 112cm good kids skis with some fun Yeti graphics which would probably work for boys or girls.

Both of my kids used versions of this ski…....

I may have the boots you are seeking - Tecnica Diablo race boots. Should fit in a USPS flat rate large box for ease of shipping from Bend.

21.5 - 260mm bsl listed as a 2 1/2 boot. High quality...

Use and swear by this this stuff to wash all the various Merino and synthetics I own (have a lot of both for various reasons). But run on cold wash and soak the first few batches well and you never...

Dibs pending answers to some questions out to @BamboocoreOnly via dm. These would be great pow sticks for my man child teen....

I have what you need (just need to double check in my garage the sole length) and would love to move the pair to a mag.

Contact me via PM and I can get you some photos and double check for...

In Seattle - have a Co-Op REV 20” - rigid bike - just tuned, my 9 year old sprouted and need to find a 24”. It’s not one of those fine kids steed brands, but they will grow quick and you be like me...

I heard back as well - you can grab for OP. He was free on Friday based on his response to me.


Sent from my iPhone using TGR Forums

I'll reach out to them as well and see if I can get a bite. In Seattle and willing to ship.

hit me up for attack1 demo's - need to dig them out of the depths of the garage - send me a PM, I think i have 110mm brakes which I have installed successfully on 106-8 mm width and on 118mm width...

@theetruscan - i'll play on the ligher pair - send you a PM just a bit ago....

Very cool idea and these skis will be great for noodling around with my kids on softer snow days.

or lock down that screw with some epoxy or jb weld so that it won't move at all. Or, pull apart the screw and bolt, add a bit of white grease to the threads, so it doesn't bind up on the nylock or...

yeah, that is likely the approach I'll be taking, with some epoxy to try to lock it down and get it back into service.

Hi all,

Hoping a shop guy/gal may know if the part shown below (the movable plastic toe piece on Attack2 13 bindings) is something that can be sourced.

Cross posting - Gear Swap posting
...

they are 2 or 3 year old bindings bought NIB from another skier... so highly doubt warranty exists any longer....

Yes - appears the plastic surround on the nut circled in the photo will not hang onto the nut any longer. Was looking at this Friday prepping to ski the weekend - so could have missed something......

May be able to cover your need - pm me


Sent from my iPhone using TGR Forums

Bump or I’ll get out the JB Weld or some epoxy to anchor the bolt back in it’s location.


Sent from my iPhone using TGR Forums

Hi folks,

This evening was attempting to readjust the toe on a pair of Tyrolia Attack2 13 DIN binders on my Quixote's. Realized toe adjuster was just spinning in place and not moving the AFD as...

PM incoming on the goggles...

@splat - trying to re-order with the code and website is saying code isn't valid...

Agreed on the binding performance - they are heavier than standard binders and may affect flex a bit with their overall length. But this is a long set of boards so is likely less of an issue. Got...

I've not skied any of the sticks you mention, so hard for me to say. But I generally ski on stiffer type skis at 6'3" 220 lbs so need something that won't go all noodly and these don't. You'll...