green cure, potassium bicarbonate, is by far the best pm remedy ive ever used, but i wouldnt use any foliar after flower is under way
chop now, do a 4 bucket wash with h2o2, lemon/baking soda,...
Type: Posts; User: forty
green cure, potassium bicarbonate, is by far the best pm remedy ive ever used, but i wouldnt use any foliar after flower is under way
chop now, do a 4 bucket wash with h2o2, lemon/baking soda,...
current indoor is 4 from seed of a cross of pitbull and dr pepper im calling barx, has a grape bubble gum smell and slightly pink tones through flower, ran it outdoor and wasnt blown away but chopped...
quick review of what ive been up to
outdoor over summer
479398
trim trim trim
479401
dry and cure
479397
thca flower is just normal flower with low enough levels of d9 to satisfy regs, basically all flower if harvested early and cured in specific way will fall into that category
potentially it may not...
fwiw there are lab test results from everclear washes of differing times/temps, as i recall you get 60%ish percent of the good stuff in a quick cold wash, and up to 85%ish from long and warm...
thc is fat and alcohol soluble, emulsification into final beverage will be important so choose which carrier you want for final best results
ive done thc hot totties with basic butter infused...
fyi filled out form for med tall turq, out of stock when went to order so ordered med tall lavender, totally ok with either color, if helpful feel free to switch me wherever gets most mags into cool...
not seeing a 2014 in 26, but the 2013 uses a 184x44 with ccrd tune
no not at all, what i meant to imply is that i dont think upsizing stem length for larger size frames makes sense for gravel bikes, they should all come with 60, its a dumb leftover trend from road...
i have seen rotors with thickness issues, and it did do what you describe, but it was enough of a variance that you could easily tell be eye/feel of the rotor so im guessing far larger than a .05...
fwiw i picked up a grizl 6 awhile back on sale, 6'3'' on an xl that doesnt feel super big, at 6' i would go L, medium would be way small imo
the plastic bb was trash, swapped to a metal screw...
been having fun with my first crossing experimentation
had a plant hermi on me little while back, let it go long enough to pollinate the other strain in tent for funsies
pitbull (father) x dr...
fwiw ive bent the brakes on old geze toe era fks, which im pretty sure are the same as current brakes, from 65ish to 118mm without issue
https://www.norrona.com/en-GB/products/tamok/tamok-gore-tex-pro-jacket-mens/?color=5510
you need to create a "loyalty program" account to see their outlet stuff
another vote for tamok, im 6'3'' 175lbs and love mine, have a large but could fit a medium, length is plenty long enough for you in large, also happens to be half off on norrona site currently
finally got out on the og protos that had been sitting in plastic since pre covid...
mounted at -1 with geze toe fks, 180lbs, 6'3'', my skiing style has been described as tip driving ex racer that...
that might be the first time ive ever heard "really impressed" and "cane creek" in the same sentence :D
fucking 300 bucks?!? yeah hell no to that shit... :the_finge
i havent been...
experts, whats the go to bb for press fit these days?
picked up a canyon grizl that came with pos bb that squeaks like crazy, the damn thing is made of plastic and a fucking joke
stock crank is...
interested...
cracked sidewall impact ski flex at all?
care to post a shot of them flexxed out for comparison?
my xxls are beat and been looking for something to replace with...
6'3'' 180lbs, tip driving non-centered skier, mounted +1.5, 194 xxls that are beat to shit with 30+ holes in each
ive skied them at +3ish and now at +1.5ish and far prefer them back, would go +.5...
the one damn thing i was hoping FIS could actually bring to the table was docking points for skid turns but as has been the trend we saw half the field skid their way down the hill at mach nil...
no shits given on branding, but ive been less than impressed with bikes direct previously, they usually spec all the small bits with low grade parts which adds up to a less than fun experience in 6...
ok experts, need a replacement for my beloved 1989 specialized epic allez dura ace, picked up used in high school and has served a faithful 25k over 25 years, 4 seattle to portlands, 12 years as a...
would also prefer med tall vest if possible, and brighter color the better (mint/pink/combos) or just black, will fill out form for black med worst case which still looks quite nice
ive been doing a 4 bucket wash for a long time with outdoor and anytime concerns of pwm with indoor
always surprising how dirty the water is with ash/dirt/bugs, but you do lose some terpenes as the...
im still doing ~100mi/wk, been doing a bunch of the workout routines which i find a lot more engaging than races, on the wet coast so later more better for me but my schedule is sporadic at best and...
trimming up indoor from couple months back, got too tall and foxtailed a little with bleached tips oops
430402
next on the indoor menu, old strain clone in back and 2 fresh ladies from beans i...
nice work in here as usual gents!
caught this one in a memory feed recently from 2015ish, working with the groms is always a good time
428134
also enjoy the tool topic, everyone does things...
damn that silca tape aint cheap at all, but the esi silicone i was looking at isnt much better
https://esigrips.com/product/rct-wrap/
current cheapo cork tape is only a few months old and already...
strong work, respect!!!
ive been slacking on digging lately, burnt myself out and needed a recharge, think im starting to feel the itch again so maybe i will have something to contribute again soon
q for the spandex types...
talk to me about silicone bar tape
the tape on my trainer bike stinks and im looking to swap it to something that wont make me want to hang an air freshener from my...
chain reaction for cheapo $234
https://www.chainreactioncycles.com/us/en/manitou-circus-expert-forks-20mm-/rp-prod158215
circus expert is a great dj fork, coil spring with air assist, this one is...
lol, you sure seem hell bent on being the expert here but sure i can explain what i meant above
manifold is cool, i didnt say its not a good strategy, i said it doesnt take advantage of some of...
absolutely, "mainlining" (which is just lst and topping) can work great outdoors, but its utility is in its ability to control plant size and maximize colas in a small space with even canopy for...
like most things, it depends...
outdoor the sun is way brighter and has a lot more penetration so i dont stress ripping leaves for that reason alone, but i do rip lower growth that i dont want to...
yeah manitou 20mm is kind of a pita if removing wheel frequently
however it kicks ass in actual performance as it allows the lowers to be spaced correctly and not pinch the stanchions against...
have you thrown in the damper from a circus sport yet?
compression damper, not rebound like i said above, it completely changes the fork from crap into decently mediocre
also i think you can swap...
if remembering correctly the 350 came in 2 hub shell sizes so you cant convert from 15/qr to 20 due to the shell itself, dumb
that said if looking for a cheap dj fork in 15mm try to find a takeoff...
you would have to space out the mtb wheelset to match the gravel one rather than match the gravel to the mtb
but you might be able to use a thin spacer behind the cassette to align them the same,...
roughly 6 weeks into flower now
412903
ripening up nicely
412902
milking up
412900
couple amber already, might be an early finisher
thanks both of ya
sounds like with tron its splitting hairs beyond that for general use...
so what if i dont give a shit about speed and purely use zwift to justify beer intake and look good naked?...
completely forgot about tron bike unlock... must have been sitting in inventory for awhile haha
407024
also, what to spend drops on???
sounds like fun!
looking at the sketch, first thing that i see is the upper section of 180 - 70 - 180 corners being difficult to hold speed through, my guess is this would turn into a pedaling...
yes
the caveat being that on a dc fork you can also adjust a-c by moving the stanchions in their crowns, but this a different variable from internal travel changes
ah, so you are looking at using reg butter and making a more fudge like candy that wouldnt require tempering
some scattered thoughts...
im not super familiar with working with butter in that...
gave the trainer bike some love recently
thanks to some expert advice got new rings/chain sorted
403820
sad day when this one died, purchased in 1996 this has seen 3.5 seattle to portlands,...
the juice aint worth the squeeze...
ethanol will easily pull 90%+ of cannabinoids, trying to reclaim the other sub 10% is not worth the time/money/effort unless you are running large scale, and at...
the dumonde tech freehub oil is worth having on hand if you do your own maintenance, its good shit
however for the dirtbag mechanic ive used a little slick honey mixed with triflow to a nice runny...
allow me throw my unsolicited 2 cents in...
that article is a good starting point, but its incomplete in its science, and offers imo poor advice in a few places
for anyone making tincture i...
3mm dish offset is closer to 3/4 - full turn of each spoke
my sx trail has an offset rear end and i swap with my dj occasionally as its easier to swap wheels and re-dish than it is to swap tires...