It's combined with the STH2 template. Can be found on Slidewright.com, but here's a direct link:
https://drive.google.com/file/d/1maC...w?usp=drivesdk
Printable View
It's combined with the STH2 template. Can be found on Slidewright.com, but here's a direct link:
https://drive.google.com/file/d/1maC...w?usp=drivesdk
So the STH2 template V1.3 from powderguide is correct?
Im asking cause i have seen already 3 different versions of templates for the STH2. Front screws 40, 42 or 42.5mm spaced
anyone have the paper template for Salomon Warden 11??? I have the jig for the 13 but the heel is different. Please send a link or send me PDF. Much thanks.
Regarding shift template:
I compared it with a salomon jig today:
The distance front single screw to first row of screws is 64.5mm
Half sole length mark on front: 16mm in front of first double screw row (seen from tip)
Half sole on rear: 20mm after first double screw row (seen from tip)
Cheers - Tom
So half sole would be a dashed line to show where the boot heel and toe will be?
Not sure why that first measurement is 1.5mm shorter. I'd think as far forward as possible would be best, but maybe I don't think it matters, as long as the piece sits in the track and doesn't come loose... I can change it though, for the sake of OCD.
Can you do a center to center diagonal measurement from the front screw to a first row screw?
Yes, i like the half sole length marks like on the powderguide templates. You can verify the boot center mark easily.
My first measurement on the bindings was 65.5 mm as well. Maybe salomon had a little bit of sliding tolerance in mind, if the ski flexes. Like on some plates. The front part is quite long.
Diagonal i can do next time when im in that workshop.
Attachment 258623
Forgive me if it's already out there on this thread but I can't find it. Any paper templates out there for the Dynafit Beast 14? I've heard its a toe piece like the Radical 2 and a heel piece like the beast 16 but can't seem to find either template like what's on here.
Thanks
the rad 2 I found on knut's website
pm him or search for his link in this thread
maybe he's got the beast 14 too
I got a PDF emailed to me of the TR2 template if anyone needs it.
Used it successfully once, about to use it again - printed on a plotter.
Can't seem to attach it yet so let me know and I'll try to throw it up somewhere (drive, dropbox, whatever).
Searched for a while and didn’t really want to start a thread for one question, so I’ll start here - I have a pair of skis mounted with old dukes, I want to throw some griffons on instead, will the holes match up? And I can just plug that center hole....
Where's the head mojos template now? I know it's somewhere coz I used it years ago.
Sent from my SM-A600FN using Tapatalk
Have searched far and wide, but not found a paper template for dynafit low tech race 2.0 - anyone know if it can be found?
Don't need any length markings as I'll use the boot I'll use with it as length gauge, but I reckon I'll have an easier time getting the heel mounted straight with a template than without.
Hi, I need a paper template for the new Warden 11 MNC.
I see that the STH2/Warden template listed above (google drive link...) is correct for the Warden 13, but does it also work for the 11?
Thanks
I am happy if people do use my templates and develop them further. I am more than pleased, if my templates help in any way.
But please change at least the colour scheme and make it clear that this isn't a template of my making (i.e. put your name somewhere or similar). This will help to avoid confusion. I have already been contacted twice by people who were unsure whether this was one of my templates or not.
Sup guys. I just got some sick Moment Chipotle snow blades and need some bindings. A store locally has some Armada Lithium demo bindings which should work, but I can't find a paper template. Anyone have one? Is it feasible for an idiot such as myself to make one with the right software?
Haha are they shit? I want demo bindings but they're quite hard to find (Calgary), and I'd rather not spend more on the binding than the ski.
Junior Maker Free template? Mounting nephews skis and can’t seem to find anything... or advice on making my own?