Semi-Custom Dual rod/reel holders FS
The idea for this came from the [ame="http://www.tetongravity.com/forums/showthread.php?t=186529"]Weekend project idea - rod case for vehicle[/ame] thread. It seems that the "fitting" featured there isn't really a fitting at all, so I've decided to make a few.
I say that they are semi-custom, as right now the design is open to changes, but once a size/shape is agreed upon and a mold is made that's the design for a while. Here is what I have so far:
- Stainless and rubber hardware
- Accepts 2 2" PVC pipes (user supplied) for the rods
- Interior cavity measures 4.5" inches wide, 5.75" Long and a minimum of 4.25" from the center of the rod tube to the base. Center of rod tube to side is 1".
- Bottom edges are a 2" radius.
- Divider to "split" the reel compartment
To start, I want to make this fit the majority of the reels that you guys use, so some help there would be good. Other small changes and suggestions are welcome too.
PM me to order, or post suggestions here.
EDIT: Final design is in [ame="http://www.tetongravity.com/forums/showpost.php?p=2854092&postcount=29"]this post![/ame]