I confirmed the 145/180 data from Skimo Co, except that the adjustment plate is definitely 5.5mm (not 5.0 or 6.0), so the 180 ramp deltas should be adjusted accordingly (i.e., downward by a whopping 0.5mm) ... although oddly enough the riser deltas are correctly reported.
(For even more confusion -- although only to the extent of that same half a mm -- the Helio plate is correctly reported here at 5.5mm:
https://skimo.co/pin-heights ... even though the identical Hagan plate is reported at only 5.0mm.)