I think I have what you need, it may be a day or two until I can check though.
Sounds good, shoot me a message when you can
Sent from my SM-G960U using TGR Forums mobile app
ISO: 15s or 18s with 115 brakes...lemme know what you've got
ISO: 15s or 18s in raw with 95 brakes.
PSA for the homies:
Finding the taller (20mm total length of screw) low head / pan head screws for the pivot heels is nigh impossible. If you are missing them and desperate, you can order the CAST screw hardware kit for $16--it includes 4 of those screws. The CAST kit uses those to secure the heel riser / brake retention piece, but they are identical to the longer pivot heel screws.
If someone has a better source, I'd love to hear about it.
Sent from my SM-G965U using Tapatalk
I think BF has them? https://www.bindingfreedom.com/pozi-...vidual-screws/
https://uploads.tapatalk-cdn.com/202...056488444a.jpg
Sent from my SM-G965U1 using Tapatalk
You're totally right. I looked quickly on my phone when I would rather look on a computer and missed that detail. It does look like they have alpine panheads in 28mm though, so getting those and filing them down is a possibility? That one is also measured from the bottom of the head to the tip.
Sent from my SM-G965U1 using Tapatalk
Yeah that would have been too easy I guess! The 28mm panhead is a little too long, and because it's only partially threaded there are only a few thread remaning when it's ground down.
Thanks, I will try that. I should probably call/email CAST and ask them where they get their screws. Funny that it's so hard to source a new, fully threaded pan head screw longer than 17mm.
Sent from my SM-G965U using Tapatalk
Got a buddy whos looking for some P18/15 WTR/GW AFDs, anyone holding?
ISO: 115mm Pivot brakes. Let me know thanks
Anyone have any half moons sitting around? Cracked one on my CASTified FKS on my last weekend of the season last year and made due for one final tour but I'd rather fix em than keep skiing on a half busted binding.
https://www.slopestyle-ski.com/acces...-moon-pid-9133
$12.99 at slopestyle. Replaced one of mine last year
Deleted
Found answer
Anyone have some 95mm pivot brakes they’re willing to part ways with?
Sent from my iPhone using TGR Forums
I have FKS 120s with 95mm brakes available. PM me if interested.
Attachment 425703
Sent from my iPhone using TGR Forums
I am also I'm search of 95mm brakes, have newish 130s or good condition 75s to trade.
I also have a few turntables sans brakes, screws, and halfmoons kicking around, free.
Sent from my SM-G965U using Tapatalk
Need one or a few AFD’s for race toes (old style/pre relaunch) or instructions on how to modify the new ones to fit the old toes
Sent from my iPhone using TGR Forums
Another PSA for the homies: The 28mm pan-head screws (partially threaded, black in color) that could be found at skimo.co and look similar to 28mm pan-head screws offered elsewhere ARE NOT ALPINE 12AB THREADED. They have a different pitch and deeper threads. No doubt they will work fine in new holes, but you should not try to use those screws in existing holes--you will ruin the threads and risk a binding pullout.
Fortunately I caught this before I ruined any threads.
EDIT to say that the difference in pitch is significant, not slight/compatible like the differences between a M5.5/12AB/#12 screw.
thanks, I now remember you posting that. I think the issue with me was using one new style unshaved and one old style, I believe the only way forward is using two of the same AFD's, old/old or new/new. That was a nightmare on my moments when i tried the new without shaved nubs.
Anyone have 115 brakes available? I have 95s to trade as well.