I use a Mac. I selected scaling at 100%. Ended up printing it 4 times to no avail. It auto rotated the pdf to the page.
Weird I just opened the vipec template from the link you posted and it’s totally different from the one I tried to print.
Printable View
I use a Mac. I selected scaling at 100%. Ended up printing it 4 times to no avail. It auto rotated the pdf to the page.
Weird I just opened the vipec template from the link you posted and it’s totally different from the one I tried to print.
It only printed the middle of the page and it was the two templates on top of each other. Got it under control.
Found a template for Tyrolia Ambition mount; on Pugski of all places...
https://www.pugski.com/threads/tyrol...-advice.10545/
Anyone have line of sight on a template for Rossignol 120 Axium DEMO binders?
Bump for a Marker Alpinist template. Looked back a couple pages and it sounds like a junk show using the toe of a king pin template due to the different pin line. Checking to see if anyone sourced one yet, not finding much on the webz.
Anybody have a line on a Plum Race 165/170/Oazo template? There are Plum paper templates floating around which work for the toes but not the heels. I can freehand the heels but would rather use a complete template if possible.
Hi guys! I'm back (sort of). Not spending a ton of time on TGR, but I would be more than happy to edit the first post to update it. I don't really have time to comb through the 50 pages to see what's up. If there is a volunteer to consolidate all the links to other templates, I can do the editing to the post. The pain in the neck the first time through was I couldn't find a good file hosting site for everything so I ended up using throwaway posts in padded room with attachments to get the files into the site. Not sure I have time for all that again, would be appreciated to do it that way so the links don't break over time.
^^^Solid people right there. Worth helping out for the collective for sure. Good to see you back Jon.
Sent from my iPhone using TGR Forums
Hi guys!!! I need mounting papar template for Marker Alpinist.... can you help me???
Thanks alot!!!
Enviado desde mi iPhone utilizando TGR Forums
Without printing out template and holding it up to the ski, is there a way to judge if existing holes in a ski will interfere with a new mount? For example buying a ski with two mounts for two different types of bindings, looking to add a third at a different BSL - what's the likelihood of having an issue drilling new holes?
Since the search function here is atrocious can anyone confirm the template for Tyrolia Attack2, specifically the 11s. Is there one here?
Does this Tyrolia/Head template on the Slidewright website work, which I believe is the same one above in the first post for Tyrolia...?
https://www.slidewright.com/powdergu...ing-templates/
Over on the Shift nerdout thread there was an argument about where the button should be, because the factory jig is 1.5mm back (64.5mm) from my empirically derived spec (66mm). As a result I made the template match the jig, although I think it doesn't matter (hasn't mattered yet, anyway), because mine and others' are mounted just like yours. I don't like it 1.5mm back because the button makes less contact surface with the binding plate.
I did the template for the Demo binding, and while this probably doesn't actually answer your question, I thought I'd note that on the demo version, the Attack 13 and the Attack2 13 [MNC] both share the same mounting pattern.
I'm pretty sure you're asking about the non-demo version.
The best option is simply to print out the template - after ensuring your scaling is correct.
Then simply put the binding on the printed template. If the mount holes line up, you're probably fine.
If you really want to be sure, mount to a scrap piece of wood.
That is probably 15 additional minutes, and pretty much guarantees you will catch anything that's sketchy before whacking your skis. [2x4's at the borg are a few bucks, and that's a whole lot cheaper than your dentist-kind DPS's]
The heel screw pattern is different on the Kingpin vs. the Alpinist. Does anyone have a source for an Alpinist template? Touring binging used to come with paper templates but I don’t think they do anymore.
anyone have a template for the Plum Yak?
I received the Plum Yak 14 Binding Template from Plum.
Just email their website.
Searched the thread for an Alpinist template with no luck. Anyone?
Yeah I didn't have any luck finding anything either. I just replaced my Kingpins with Alpinists, so my toe was a direct fit but I had to drill 4 new holes for the heel. I wasn't confident I could keep the heel squared up if I freehanded it, so I made this PDF for the heel. You could combine that with a Kingpin toe mounting plate. Only thing you'd need to deal with is getting the BSL right, but that shouldn't be too hard.
Hope this is helpful!