1 Attachment(s)
PSA: Mount your own fucking skis.
Quote:
Originally Posted by
lucknau
Hey, do you hand drill your insert hole, or do you use a guide or a press or some other trick?
I agree. Those are fhawt.
Hand drill.
I use a small bit to center punch based off template. Then widen to Fuller F bit (6.5mm) with a bit that has drill bit stop set to 9.5mm depth. BF sells a drill bit but I don’t like it as I found it easier to drill past the 9.5mm depth. The fuller stop makes this impossible.
Here are some links
Drill Bit Stop
LETTER `F' (.257) DRILL STOP https://www.amazon.com/dp/B001D1LPRM..._L9.MDb799YHZR
F Drill Bit and 5/16 - 18 tap
Vermont American 21668 Size 5/16 x 18 NC Tap Letter F Drill Bit Combo https://www.amazon.com/dp/B000CFJCDO..._dcaNDbB42X9Z8
Bottom has a tap included!
Attachment 296992
Sent from my iPhone using TGR Forums