9 Attachment(s)
FS: Dynafit TLT7 Expedition 26.0
Nice and light used <10 times, couldn't make them work for my feet... Liners baked once. ~1050g/boot on my scale, BSL 283mm One of the rear pulls on one of the liners ripped out so I sewed it back in and covered in shoe goo, ugly but fully functional. I will include a custom extender that allows for bigger calves to fit in... These can be removed without any issue. The Expedition version of the TLT7 features a Custom Ready liner that is warmer and takes up more space within the shell. This makes it a better fit for skinny-to-average width and cold feet. All feet will appreciate the toe fittings being moved closer to their natural pivot point. This fact, combined with the Snow-dynamic concept and Speed Nose make the “7” the most efficient climber yet in the TLT series. Turns out the ski down is pretty great too, with a simple fixed tongue system that locks into place with one motion of the new two-in-one UltraLock 3.0 closure system. The TLT7 Expedition is sophisticated enough to be incredibly simple. UltraLock 3.0 controls both buckles and the ski-walk mode switch in one spot. Speed Nose* makes every step more efficient with moved pivots and no toe bail. Lambda frame uses some carbon as a stiffener for both forward and lateral flex. Fixed tongue keeps the snow out, adds stiffness while skiing, yet walks well. Lower closure is micro-adjustable and has no clasp that gets banged on rocks. The shell is light and stiff Grilamid® and the cuff is infused with some carbon. MasterStep fittings are Dynafit's latest, super strong and easy to step-in. Snow-dynamic concept is a unique shape that helps cut drag in snow. Custom Ready liner is warm, moldable, and relatively stink-resistant. Comes with a quick-release power strap installed (not pictured). $75 + shipping? obo? or pickup in PDX Attachment 488214 Attachment 488215 Attachment 488216 Attachment 488217 Attachment 488218 Attachment 488219 Attachment 488221 Attachment 488222 Attachment 488167
