Results 1 to 7 of 7
01-08-2007, 11:05 AM #1
Tyrolia LD 12 RF binder - can I mount these flat?
Can I mount the railflex binder without the railflex plate or is it all integrated?
01-08-2007, 11:42 AM #2
Not unless they've changed the railflex system in the last year. If you have a pair of skis with the railflex system on it, you can take the whole thing off and mount it on something else though. If you pop the four plugs out at each end of the plat you will find screws underneath.It doesn't matter if you're a king or a little street sweeper...
...sooner or later you'll dance with the reaper
Kaz is my co-pilot
01-08-2007, 11:49 AM #3
Yep, what he said. If you need a flat tyrolia I'll swap you some freeflexes for the railflexes. I need a set.Driving to Targhee
01-08-2007, 11:49 AM #4
That's what I thought - thanks! (or rather, shit...)
01-08-2007, 11:58 AM #5
I have an extra set of rails if you want to mount them on another ski. Then you can swap bindings between skis in under a minute. PM for details.
01-08-2007, 03:42 PM #6"In the woods, we return to reason and faith. There I feel that nothing can befall me in life, — no disgrace, no calamity, (leaving me my eyes,) which nature cannot repair." -Emerson
01-08-2007, 03:58 PM #7
Thanks, but I only have one pair of skis these need to go on.
By mn_teleskier in forum Tech TalkReplies: 0Last Post: 03-14-2006, 12:27 PM
By descender in forum Tech TalkReplies: 40Last Post: 12-25-2005, 01:29 PM
By yesIsaidyes in forum Tech TalkReplies: 1Last Post: 12-04-2005, 09:45 PM
By hyasakyte in forum Tech TalkReplies: 5Last Post: 10-20-2003, 02:43 PM