Results 1 to 3 of 3
Thread: Another BD Question
03-13-2006, 02:59 PM #1
Another BD Question
I'm trying to expand the boots sole length of 6:14s (on 03/04 BD's with riser plate) from ~310 to 335mm. I've removed the orange AFD plate and slid the toe and heel piece apart to the 330mm setting, then I re-attaching the AFD plate. It fits my boot now, however the heel piece hangs out over the back of its rail by about 3 cm. I'd like to remount the binding a little wider, on the riser plate, to eliminate this overhang.
My question is do I need a jig, or other special equipment, to remount the binding to the riser plate? Does the riser plate have pre-set holes for a wider mounting?
Thanks & JONG away
03-13-2006, 04:32 PM #2one-track mind
Originally Posted by This End Up
- Join Date
- Jul 2004
- back in NorCal
I say take a screwdriver (posi might be best), open it up, and go for it. But don't sue me if you have troubles---I never tried it myself.
.My biggest goal in life has always been to pursue passion and to make dreams a reality. I love my daughter, but if I had to quit my passions for her, then I would be setting the wrong example for her, and I would not be myself anymore. -Shane
03-13-2006, 09:22 PM #3
Thanks, that was easy.