DIY Freeride Spacer

[EricB]

Looking to add an ATK-esque freeride spacer to some Marker Alpinists AND MTN's.
ATK discontinued the universal AL05 spacer....so it seems I'll have to go the DIY route.
Does anyone have a more elegant solution than using a cutting board or some misc plastic? Would love some micro adjustability that the shims in the ATK model provide.

[GoldenBC]

I used an AFD from an old look p14. With an Mtn with no heel track, it was the exact right height. I cut the baseplate of the toe piece in half so there were two screw holes with the AFD. Super clean, doesn’t hold snow.

Many other AFDs offer a good solution too.

[ktoor]

dunno if this helps: https://skiuphill.ca/products/atk-un...i&_ss=e&_v=1.0


Sent from my iPhone using TGR Forums

[oltrepiave]

if you have contacts/access to someone in Italy there's still plenty shops carrying the original AL05 at a great price as well.

https://sport.ercoletempolibero.it/p...niversale.html

pretty small mom-and-pop kind of shop but totally legit.


I'm currently using a pair of AL05 and purchased an extra set for 25 euros.

[cat in january]

A note on the Al05: I used a 1/4” spacer on my heel and still had to sand down the base to make it work with the Marker Alpinist.

[frorider]

I’m using the ATK universal spacer with my Alpinists and skorpius II boots, had to adjust it down to nearly the lowest setting but fits fine. However it’s a bit too tall with my Maestrale boots.

[teamdirt]

I have a brand new set of atk universal spacer AL05 I’m willing to part with. Let me know.