Results 1 to 9 of 9
Thread: Removing pole grips
-
12-03-2003, 04:54 PM #1
Architect
- Join Date
- Oct 2003
- Location
- ne
- Posts
- 400
Removing pole grips
I have an old pair of beat up scott poles and I'd like to transfer the grips to a new pair. What is the easiest way to get the grips off?
Thanks
-
12-03-2003, 05:04 PM #2
(╯°□°）╯︵ ┻━┻
- Join Date
- Oct 2003
- Location
- All over NCal
- Posts
- 4,391
bucket of hot soapy water and vice grips
When life gives you lemons, don't make lemonade. Make life take the lemons back. GET MAD! I DON'T WANT YOUR DAMN LEMONS! WHAT AM I SUPPOSED TO DO WITH THESE?! DEMAND TO SEE LIFE'S MANAGER! Make life RUE the day it thought it could give YOU LEMONS! DO YOU KNOW WHO I AM?! I'M THE MAN WHO'S GONNA BURN YOUR HOUSE DOWN! WITH THE LEMONS! I'm gonna get my engineers to invent a combustible lemon that's gonna BURN YOUR HOUSE DOWN!
-
12-03-2003, 06:54 PM #3
Registered User
- Join Date
- Oct 2003
- Location
- Down the valley a bit further on the good side of the 49th
- Posts
- 4,396
Crock pot full of hot water and let them steam 20minutes to break down any glue and then yank them between the door jamb and door.
It's not so much the model year, it's the high mileage or meterage to keep the youth of Canada happy
-
12-03-2003, 08:37 PM #4
White and nerdy
- Join Date
- Nov 2003
- Location
- NH
- Posts
- 754
If you don’t know how to boil water but have vice grips, a wrench, and a hammer try this. Tighten the vice grips around the pole, place the wrench around pole just below the grip, smash the wrench with the hammer knocking the grip off. Legs and/or armpits could substitute for vice grips if you’re talented.
-
12-03-2003, 09:56 PM #5
Lackey
- Join Date
- Oct 2003
- Location
- Hunter Thompson described it as hell.
- Posts
- 2,682
Oh and some of the older ones have a plug in the top of the pole, remove the screw that holds the strap.
BTW, no one mentioned don't pull into yourself, no skewering, etc...
Skiing, where my mind is even if my body isn't.
-
12-03-2003, 11:06 PM #6
mutant
- Join Date
- Nov 2002
- Posts
- 3,626
Stormrider knows what he's talking about. A getto way we used to do it in our little rental shop is this. Put two chairs facing each other with the pole just below the grip wedged inbetween. Stand on the two chairs and pull the shaft verticle minding not to poke your eye out.
-
12-05-2003, 03:29 AM #7
_
- Join Date
- Oct 2003
- Posts
- 1,673
That's waaaaayyyyy too much work. Soaking them in anything that will hold enough hot water (you can even use a bathtub) makes it a hell-of-a-lot easier. Make the water as hot as you can out of the tap (i.e. don't boil it, or heat it on a stove).Originally posted by Foggy_Goggles
Stormrider knows what he's talking about. A getto way we used to do it in our little rental shop is this. Put two chairs facing each other with the pole just below the grip wedged inbetween. Stand on the two chairs and pull the shaft verticle minding not to poke your eye out.
-
12-05-2003, 07:40 AM #8
mutant
- Join Date
- Nov 2002
- Posts
- 3,626
Uh, OK dude...That's why ski shops always keep a pot of water on the stove. I've pulled grips off hundreds of pairs of poles. If the yanker was at another store, his is what we'd do. It really takes about 10secs.
-
12-06-2003, 11:46 AM #9
Core Broletariat
- Join Date
- May 2002
- Location
- Tahorado
- Posts
- 22,321
That's it.Originally posted by L7
Crock pot full of hot water and let them steam 20minutes to break down any glue and then yank them between the door jamb and door.
Reply With Quote
Bookmarks