Results 1 to 8 of 8
Thread: FS: Pivot Mach 6, medium
-
07-01-2016, 01:45 PM #1
FS: Pivot Mach 6, medium Reduced $1300
Pivot Mach 6 Carbon (medium). Overall the frame is in great condition. Most the wear and rub spots have been protected with frame protector or tape. The bike does show some blemishes. The most significant is at the lower pivot, apparently this is common with the Mach 6 frame as dirt, gravel gets thrown into the pivot then scratches it up. The other spot is on the rear drive side inner chain stay that must have been chipped by a dropped chain. The last picture of the chain stay looks like it has a big chunk taken out right near the drop out but that is supposed to be there for a bolt. The blemish is towards the upper part of the chainstay. Here is a reply from Pivot when I emailed them a picture of pivot area.
I have seen this problem occur before.
It essentially results from dirt and debris getting stuck in the DW-link and grinding away at the paint. This is purely a cosmetic issue, my personal bike is developing these wear marks as well. Continue to keep this area clean and free of debris to prevent any future wear.
Please let me know if you have any other questions,
Thanks.
Nate Rees | Customer Service Representative, Pivot Cycles
Frame will include bottom bracket and Cane Creek headset. 142x12 rear spacing for the dropouts. RS Monarch Plus Debonair shock.
This bike has been used so it is not show room clean but it is in great condition for a bike that has been ridden.
$1400 here for frame set plus shipping if needed. Would be willing to negotiate parts into the sale.Last edited by jqualls; 08-12-2016 at 10:12 AM.
-
07-02-2016, 08:35 AM #2Registered User
- Join Date
- Dec 2012
- Location
- Tahoe
- Posts
- 250
Damn, if only a large...
-
07-03-2016, 07:05 PM #3
Yeah if it was a large it wouldn't be up for sale. Just a little small for me.
-
07-08-2016, 09:36 AM #4
Complete bike with Pike RCT3, Stans Arch ex wheelset, and Sram XX1 drivetrain available for $3300.
-
07-08-2016, 12:40 PM #5
As a completely disinterested bystander may I say that I bought an M6c last year with a different component package and I really like this bike.
I thought my Epiphany climbed well (it does) but this bike is better and it descends much much better.I have been in this State for 30 years and I am willing to admit that I am part of the problem.
"Happiest years of my life were earning < $8.00 and hour, collecting unemployment every spring and fall, no car, no debt and no responsibilities. 1984-1990 Park City UT"
-
07-21-2016, 01:24 PM #6
Just found a large frame that I am picking up so this frame needs to go. $1400 for the frame set.
-
08-12-2016, 10:11 AM #7
Updated with new pictures after being torn down and price reduced. $1300 for frame set.
-
08-29-2016, 09:27 AM #8
SOLD
Bookmarks