Feeler FS: DPS Wailer 112 and 99, 3 comfort toe pieces

[harpo-the-skier]

Feeler FS, both from original year they came out:

DPS Wailer 112 carbon (pure 1?), yellow, 184, binding freedom inserts for original dynafit pattern at 297mm. Great condition, edges, bases great.

DPS Nina (women's version, identical to Wailer 99) 176, carbon (pure 1), same condition as 112, same mount as 112.

3 Dynafit Comfort Toe Pieces, all good, fully funcitonal. Would like to trade for one Vertical ST toe piece in good condition.

Both BF mounts are great. More details, pics, if there is interest. Right now I am wondering if I should take time off from home improvement projects, but I could sell them now if someone really wants them. I am newly married and can't justify my quiver.

[harpo-the-skier]

112 pics

[Ottime]

Congrats on the marriage. Not sure how you need to justify the quiver. Think of it as your fidelity blanket. If you are just skiing, then there is no time to cheat. How much are you thinkin for the Nina? Probably to rich for my thin blood, but that would make a nice peak baggin tool. Bsl is right as well.

Am I wrong to assume the Verticals would fit into the BF holes?

[harpo-the-skier]

I would am looking for $350 shipped for either Nina or Wailer. I will be more willing to negotiate if they don't sell by the beginning of fall.

I will have to look at the Ninas closely to report on condition; my recollection is that they are in great shape. I will try to do that in next couple of days.

Condition of w112:The w112's have been mounted with BF inserts at 297mm for the old dynafit pattern. Mount is good and bindings have been mounted removed numerous times. BF inserts were a little high, so I had the top lip ground down. I tiny bit of the carbon top layer was exposed around a few of the inserts. I checked with DPS, this is not an issue as the carbon top layer is water proof.

Top edges of ski (around top sheet) have been beveled to prevent chipping. Top sheets are in very good condition.

Bases are great. Last couple of seasons in Tahoe have been pretty bad so storage wax was scrapped but they haven't been skied since. Bases might be a little oxidized but that might be left over storage wax.

Edges are in very good condition. They have one tiny spot of rust.

best to contact me by email at anthonyrabinowitz at att dot net

[harpo-the-skier]

Toes Pieces: traded

Skis: Still available.

Ottime: I use Verticals with the w112

Price reduction: $300 on the W112

[Mr. Toad]

Are the inserts dead-on, perfectly mounted? ie no need to enlarge binding holes, misaligned pins, etc? How much for local p/u?

[harpo-the-skier]

MT, inserts are perfectly located; I talk a little more about the insert mount earlier in this thread. I did enlarge the screw holes in the dyna toe plastic base plate but that was because the original base plate holes are really tight and the machine screws for the inserts work better with slightly larger holes. No problems with pin alignment if you follow the dyna binding mount directions on Lou's website about aligning the toe piece to the heel piece. You are free to come look at the skis; I am in Tahoma now. Feel free to make me an offer on these but I am not too negotiable in price until closer to next winter. Pls PM me your phone number, I lost it when my phone exploded.

[harpo-the-skier]

Both pairs of wailers still available. You will be able to use these soon!