Results 1 to 7 of 7
  1. #1
    Join Date
    Sep 2004
    Location
    LV-426
    Posts
    21,126

    10 and 9 speed compatible - 11t cog

    Somewhere in my garage is a 10 speed 11t cog, which I dropped and can't find. I have a 9 speed cassette that I can swipe the small cog from. Will it work with 10 speed?

    (guess I should check that it is actually an 11t cog on that 9 speed cassette...)
    Quote Originally Posted by powder11 View Post
    if you have to resort to taking advice from the nitwits on this forum, then you're doomed.

  2. #2
    Join Date
    Sep 2004
    Location
    LV-426
    Posts
    21,126
    Bump.

    Alternately, anyone have a worn-out 10spd Shimano cassette, and wouldn't mind mailing me the 11T cog?
    Quote Originally Posted by powder11 View Post
    if you have to resort to taking advice from the nitwits on this forum, then you're doomed.

  3. #3
    Join Date
    Nov 2011
    Location
    Elmore, VT
    Posts
    1,211
    Look at the "spacing" chart on this page for your answer.
    http://sheldonbrown.com/gloss_sp-ss.html#sprocket

  4. #4
    Join Date
    Feb 2012
    Location
    Missoula
    Posts
    2,104
    I have an old one sitting in a drawer, but I wouldn't use it. Last new chain I put on was slipping in the 11t for about a week so this time around the cassette got replaced too. I'm sure a local shop has a few sitting around. And no I don't think 10- and 9- speed cogs are compatible.

  5. #5
    Join Date
    Sep 2004
    Location
    LV-426
    Posts
    21,126
    Quote Originally Posted by milestogo View Post
    Look at the "spacing" chart on this page for your answer.
    http://sheldonbrown.com/gloss_sp-ss.html#sprocket
    Quote Originally Posted by jamal View Post
    And no I don't think 10- and 9- speed cogs are compatible.
    Thanks. Guess I won't be using that 9-spd 11T.
    Quote Originally Posted by powder11 View Post
    if you have to resort to taking advice from the nitwits on this forum, then you're doomed.

  6. #6
    Join Date
    Sep 2004
    Location
    LV-426
    Posts
    21,126
    Found the cog. That wasted a lot of time...
    Quote Originally Posted by powder11 View Post
    if you have to resort to taking advice from the nitwits on this forum, then you're doomed.

  7. #7
    Join Date
    May 2006
    Location
    Back in SEA
    Posts
    9,657
    I was gonna say "ask a pre-cog" but that doesn't make any sense because they would have told you that you will end up finding it already.

    ... jfost is really ignorant, he often just needs simple facts laid out for him...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •