Results 1 to 8 of 8
Thread: Jong Tube Question
-
04-21-2014, 08:01 AM #1
Jong Tube Question
Try not to laugh me out of the room on this one fellas. I picked up an old Raleigh commuter on Craigslist to replace my old commuter that was stolen last summer. The bike came with 27 x 1/4 wheels, one of which has a Presta valve and the other has a Schrader. I'm already replacing the tires with some new Continental Supersports but wanted to know what the implications are of running two Presta valves instead of one of each.
Should I just sack up and do it and stop nerding out over this?
-
04-21-2014, 08:06 AM #2
Yes, no problem.
-
04-21-2014, 08:18 AM #3Gluten Free Dan
- Join Date
- Dec 2010
- Posts
- 1,169
Both the same wheel? Could be that one wheel only accepts schrader valves.
-
04-21-2014, 08:21 AM #4
Going from Schrader to Presta = no problem. Going from Presta to Schrader = might have to drill out the rim.
-
04-21-2014, 08:34 AM #5
Thanks guys. I want to go from Scrader to Presta on one of the rims to avoid having two types of valves since the other rim already has a Presta valve.
-
04-21-2014, 10:49 AM #6
Just be sure and either get the grommet adapter thingy or put a presta nut both inside and outside the rim to prevent the tube eventually blowing through.
I rip the groomed on tele gear
-
04-21-2014, 07:40 PM #7
I've never heard of putting a nut on the inside as well as the out side.
-
04-21-2014, 07:51 PM #8
Bookmarks