Results 51 to 75 of 106
-
07-18-2013, 11:38 AM #51
-
07-18-2013, 01:40 PM #52
-
07-18-2013, 06:58 PM #53
I've got a template with measurements on it, will put up a photo
-
07-24-2013, 05:16 PM #54
-
10-13-2013, 12:06 PM #55Registered User
- Join Date
- Aug 2008
- Location
- Salt Lake City
- Posts
- 50
Just gave Tutuko's measurements a shot and everything worked out perfect. I just measured 136.5mm back from the 325 BSL and overlayed the 32x75 heel pattern. The toe pattern was exactly the same and the mid sole to first screw distance was the same as the template above.
Mount went flawless with some atomic sth2 16 on line blends. Also the walk to ride setup is pretty cool.
Throwing the heel piece to mid it fits awesome. Each heel need about 3 clicks forward to get the forward pressure right.
Last edited by larfburger; 10-13-2013 at 12:17 PM.
-
10-14-2013, 02:07 AM #56
Good to hear, I forgot to mention I used STH 1 jig for the toes. After 15-20 days on them, still a big thumbs up, but not sure how the elevated plastic toe platform will hold up over the years.
-
11-15-2013, 06:12 PM #57
I'm a little confused about the "WTR" sole -- so are these bindings indemnified for, say, my new Dalbello Lupos that should be coming next week?
Gravity. It's the law.
-
11-17-2013, 02:01 AM #58
-
11-17-2013, 11:13 AM #59
-
11-17-2013, 11:53 AM #60
What gramboh says. They are indemnified for any ISO 5355 sole (alpine shape), so Lupo, Panterra, K2 Pinnacle are fine. Salomon is trying to convince other manufacturers to adopt their WTR sole as an industry standard, but so far it's just the Amer companies (Salomon and Atomic) - though Lange/Rossi and possibly others are supposedly signing up for 2014/2015. Personally I'd feel confident in a Tecnica AT sole, but a shop will have to fail it.
As far as the new bindings go, I mounted two pairs of STH2 Atomics on personal skis this week, and was stoked to have the brakes go on as designed (not always the case with the STH1). Something they don't tell you is the plastic tabs on the front two holes of the heel are meant to collapse - just keep tightening them until they crack and the heel goes flush with the ski deck.
-
11-17-2013, 12:08 PM #61
PS Also the rear screws on the heel have some sort of tensioned ratcheting thing going on - you'll feel little click stops as you turn the screw, and they feel like they're spinners, but just keep going until you reach the desired torque (4nm) . . .
-
11-17-2013, 12:33 PM #62
I'm gonna wait & see with STH2 to see if it's a long-term deal. I'm not entirely sure the change was really necessary? Salomon has had the same hole standard for so long...I just don't get it. Why fix something that isn't broken...?
My "Old Larry" coming out. Sorry.Gravity. It's the law.
-
01-20-2014, 01:09 AM #63
so what's the conclusion on the ramp height of the sth2 vs the sth 16.... one thing i love about all the old sollies, the 900 series, the 916 series and the sth was the position i was in when skiing, is it different/same? i like the positive ramp, i dislike the flatter feeling of the dukes and etc.
Do I detect a lot of anger flowing around this place? Kind of like a pubescent volatility, some angst, a lot of I'm-sixteen-and-angry-at-my-father syndrome?
fuck that noise.
gmen.
-
03-05-2014, 09:30 PM #64
Can anyone tell me if these bindings are compatible with a Black Diamond Factor with the vibram soles, not the alpine soles?
Thanks.
-
03-25-2014, 01:55 AM #65
No... Well, it is probably going to "work" but it aint going to be as safe as you want. You need next year's Warden binding. I'm pretty sure that Factor boots wasn't on the very short black list of the Warden.
-
04-03-2014, 09:14 AM #66Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,547
Grabbed a pair of sth2 13 yesterday from Starthaus, just a silly deal, thanks for passing it on guys.
So question, anyone using these with Cochise tech soles? Thought? Safe? Stupid?
Would rather know if they release properly than they fit. I value my knees......
-
04-03-2014, 12:13 PM #67
-
04-03-2014, 12:52 PM #68Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,547
I have markers on allot skis. Just fancy trying something else. If I have to do a sole swap that's fine I have both. Just trying to make life easy!
-
04-03-2014, 06:48 PM #69
-
04-04-2014, 06:01 AM #70
My cochise techs laterally release just fine from STHs. Should be the same for STH2.
-
04-08-2014, 10:43 AM #71Registered User
- Join Date
- Feb 2014
- Location
- NorCal coast
- Posts
- 1,970
Probably dumb question, but I've searched a lot and can't find a straight answer: will STH2's work with my Dynafit TLT6 P boots?
The reason I ask is I've got an old pair of K2 Obsethed currently mounted with Fritschi Freeride Pros that I want to turn into my resort skis. I ski 90%+ of the time backcountry, but every now and then get dragged into the resort. I can't stand how high the Fritschis stand, so looking for a "normal" height binding. I'd like to ride the Obsethed in resort because they're fun as hell and can handle anything. I don't want to ride my BC skis at the resort because they've got Radical Speed bindings (leash) and Radical ST bindings (worthless brakes), both of which are really harsh on hard snow. I don't want to throw down ~$600 for a pair of resort boots & bindings for a couple days of use, but could see snagging a pair of on-sale STH2s for that purpose.
The reason I suspect that the STH2 may work is that even though there isn't an ISO/DIN listed for the TLT6s, I did find some posts saying they were "compatible with alpine touring frame bindings". I would think that if they work in Fritschis, they'd work on the STH2, since it would be similar issues with the AFD. The toe rocker doesn't seem extreme, although the toe tongue looks sorta short.
-
04-08-2014, 11:13 AM #72Registered User
- Join Date
- Jan 2013
- Posts
- 11
No the TLT's don't have anything close to a DIN block, just a crampon toe.
-
04-18-2014, 04:37 PM #73
How skinny a ski can be for those to fit? The shop manual from salomon says the jig is from 56mm tot 143mm, I measure the sth2 13 I have at home and the heel track is pretty close to 56mm so that's where it's coming from but the toe piece is almos 80mm on the wider part.
I wanna mount that on a Praxis SND which is 82mm underfoot, so certainly wider where the toe/heel piece would go but I'm not sure how wide
-
10-25-2014, 12:28 PM #74Registered User
- Join Date
- Feb 2008
- Location
- California
- Posts
- 209
I tried to find STH2 template. Someone can help me?
-
10-25-2014, 12:31 PM #75
Bookmarks