Thread: FS - Dynafit Titan TFX 27.0

Dynafit Titan TFX 27.0 312 BSL

45 days total (i bought them NIB)
37 inbounds on DIN blocks (used cat tracks while lot walking)
8 days on AT blocks (mostly inbounds as i am/was a dynajong; NO rock scrambling)
the Dynafit fittings and vibram (skywalk) soles are like new.

liners unbaked, used 6 days.

* small (~ 1cm) tear in the inner, upper, right hand cuff, of the left boot (the black cuff).
(this was caused be a mis-overlapping of the inner (black) cuff and outer (white) cuff and skiing 2 runs)

anyway, it is (IMO) a cosmetic flaw and i haven't noticed any change in the performance of the boot, but full disclosure is a must.

i wouldn't be selling but a like new pair of Cochises just followed me home.

* pictured with Booster strap, will ship with Stock strap. *

TRADED to postholio!!!

tech fitting/sole pics & pic of inner cuff tear (i placed a business card into the tear to make it easier to see):

what's your street shoe size? having a hard time finding these to try on.

Thx

^^^ 9.5

bumper cars.

price drop bump.

$300 shipped CONUS

Originally Posted by milestogo

what's your street shoe size? having a hard time finding these to try on.

Thx

Are you kidding? Outdoor Gear Exchange. Burlington, VT. If you are in Elmore. Only a 40min drive. C'mon over. Then you can buy Pfluffs.

^^^ capital idea!

bump up the volume.

Originally Posted by rangerjake

Are you kidding? Outdoor Gear Exchange. Burlington, VT. If you are in Elmore. Only a 40min drive. C'mon over. Then you can buy Pfluffs.

Tough to get to the big city sometimes between work and kids...but if I get there in the next couple of weeks I'll try some on.

drill a small hole at the end of that tear--it will prevent the tear from propagating as long as it is drilled round with the end of the tear in the center of the hole.

^^^ that's good advice.

consider it done.

bumpty-dance

pm sent...

jfrost's foot didn't agree with the titan, these are still available.

summer time sucks bump.

Yo Pfluff,
What's up with the tape on the outer pivots?

those pivots affect the canting of the boot.

some people experienced shifting of the canting cam while skiing.

dynafit did make a new replacement fixed position cam (although i dont know the canting angle of the non-adjustable cam).

the easy low-tech fix was to put some duct/gaffer/tenacious tape over the inside and outside of the cam (after adjusting it to your preference) to prevent movement.

i used some clear automotive duct tape, worked well.





you buy my boots!

Price drop: $275 + shipping


winter is coming.

... and TRADED to postholio!!!