Results 1 to 3 of 3
Thread: Mounting Marker Baron
-
03-09-2012, 10:51 AM #1
Registered User
- Join Date
- Dec 2008
- Posts
- 9
Mounting Marker Baron
About ready to mount a set of Marker Barons, but I remember reading a blog (some time ago) about problems with the Duke and some of the issues concerning the center screw. The blog went on to offer some suggestions etc to minimize any potential failure of the screw, for example, tighten the screw then back off a ¼ turn, use of epoxy, torque the screw down etc. So before I start down the road of no return, I’m curious if there’s a recommended method for mounting the center screw?
Cheers
-
03-09-2012, 11:04 AM #2
Registered User
- Join Date
- Nov 2003
- Location
- Wydaho
- Posts
- 1,609
here is the thread your referenced that Spats started...
http://www.tetongravity.com/forums/s...ons?highlight=Aggressive in my own mind
-
03-09-2012, 02:42 PM #3
Registered User
- Join Date
- Dec 2008
- Posts
- 9
Hoarhey, thanks for the link. That’s exactly what I was looking for.
Cheers
Reply With Quote
Bookmarks