Results 1 to 16 of 16
Thread: What screw pattern is this?
-
02-22-2012, 10:19 PM #1
What screw pattern is this?
I picked up some S7s from REI's basement, and I might want to try to reuse the holes since they've been drilled twice. Can anyone tell me what bindings were on these?
Toe:
Heel:
At first I thought Dukes, but I have Dukes on other skis and the middle screw seems to be farther back than these holes.that's all i can think of, but i'm sure there's something else...
-
02-22-2012, 11:06 PM #2
Marker Biometric something? Couldn't find a template to confirm my suspicions, but it looks close. If so, still want to reuse those holes?!
-
02-22-2012, 11:09 PM #3
gross dude
that's all i can think of, but i'm sure there's something else...
-
02-22-2012, 11:22 PM #4who turned up da gravity?
- Join Date
- Dec 2011
- Posts
- 231
px's, then ESSVAR bitches!
jk - just pick a dry patch and drill baby drillSki more blog less - Foggy Goggles
-
02-23-2012, 12:05 AM #5
For real, it looks like it's probably either Marker Griffon Demo or Marker Schizo.
You can either check by using a paper template, or taking it to your local ski shop.
-
02-23-2012, 02:27 PM #6
is it the duke
-
02-23-2012, 05:07 PM #7
Definitely not, center hole is way too far forward, as OP noted.
-
02-23-2012, 07:23 PM #8
-
02-24-2012, 11:21 AM #9
I would guess they tried the mount at 0 and -2 which seems to indicate against either demos or Schizo but who knows what happened. The reason for return was "Skied a few times, did not like style/design". Maybe I'll consult some templates tonight.
that's all i can think of, but i'm sure there's something else...
-
02-24-2012, 11:25 AM #10
Hole pattern is Jester/Griffon demo or Schizo, for sure
-
02-24-2012, 11:28 AM #11
This 'template comparison' might help.
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
02-24-2012, 11:41 AM #12
That is way cool, thanks a bunch!
I guess it does take a little of the fun out of it though.Nothing makes a fish bigger than almost being caught.
-
02-28-2012, 08:16 PM #13
That template comparison is rad, thanks!
I took them down to Evo and we looked at where we could put a Look PX14, unfortunately the holes interfere pretty badly and we'd be looking at going pretty far forward. At 0 this ski looks like it has a lot of tail, I don't think I want to go forward.
I have a pair of Look Pivot 12 demo bindings, and by messing around in my living room, it looks like it would be pretty easy to line these up in a reasonable way. They seem like decent bindings, I don't need a DIN higher than 12.
Does anyone have a template or a manual for these? I have been looking around and haven't found anything, there were old threads that had binding manuals but they pointed to Rossignol's website and the files have been taken down.that's all i can think of, but i'm sure there's something else...
-
02-29-2012, 06:47 AM #14
Thanks for the template comparo link goes to Knut.
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
02-29-2012, 09:06 AM #15
I have the 195s mounted -1.5cm.... I would not recommend going forward of the 0 line. I think your instincts are good there.
-
02-29-2012, 04:19 PM #16
Bookmarks