FS: Juicy-5 brakes and X.9 drivetrain stuff [o]

**scrublover** · 01-25-2011, 10:06 PM

If price police think I'm out of line, well, make offers.

Juicy-5 front and rear set. 185/160 rotors, with post mount and IS adapters for the front, IS for the rear. Comes with rotors and mount bolts to get things going, the original Avid lever blades, and the pictured installed Dangerboy lever blades. No leaks, work well, just scratched up a bit. Rotors and pads with some decent life left. Just swapped to some new brakes, and these need a home. Hose lengths - front approx. 28" and rear approx. 53" long. $100 SHIPPED

Juicy-5 front and rear set. 185/140 rotors, with post mount and IS adapters for the front, IS for the rear. Comes with rotors and mount bolts to get things going, the original Avid lever blades, and the pictured installed Dangerboy lever blades. No leaks, work well, just scratched up a bit. Rotors and pads with some decent life left. Just swapped to some new brakes, and these need a home. Hose lengths - front approx. 28" and rear approx. 48" long. $100 SHIPPED

SRAM x.9 front shifter, rear short cage mech, 11-34 9 speed cassette. You'll need a new chain and shifter cable/housing, but otherwise, you can bolt it right up. This one doesn't have the pimpy red cassette lockring,b ut a perfectly nice (and still light alu) silver one, gold spider on the cassette. $100 SHIPPED

SRAM x.9 front shifter, rear short cage mech, 11-34 9 speed cassette - red spider and lockring on this one. You'll need a new chain and shifter cable/housing, but otherwise, you can bolt it right up. $100 SHIPPED

Gimme' enough on these last two to cover shipping and a beer or three and they're yours.

SRAM 9 speed cassette, 12-34 with the last three cogs on an alu spider, the next four bolted together, the last two loose. The level below the other two cassettes pictured. No lockring, but little mileage.

Truvative Boxguide chainguide for a single ring -32-38 tooth, ISCG-old - (NOT ISCG-05) Not particularly light, but it's cheap, and it works. No, I have no idea if it'll work on your particular frame or setup. It's got some pretty good adjustability built into the system. New mount bolts.