Results 1 to 20 of 20
Thread: FS - Heated Pneumatic Ski Press
-
07-30-2008, 12:54 PM #1
FS - Heated Pneumatic Ski Press
So throwing this up there. I may already have a local buyer, but though I should get this up anyway.
It is about 8' long, stands about 5' high. Press cavity it 84" long, 15" high, 10" wide.
Main beams are 94" 5" x 5" x 3/8".
It is drilled for ~ 148 1/2" grade 8 bolts. Each bolt has 2 washers, a lock washer, and at least 2 nuts.
It can be taken apart and put together ina few hours.
The hose is already sealed, and I have a spare that will come with it.
It has a PID controller and a MEI heat blanket ready to go.
Cat track is 3/4" aluminum tubing and attached to some aluminum angles with I think 21 springs per side.
I press at 70 psi with no problem, and have tested it up to 100 psi.
Length wise I am able to press 191cm true tip to tail, but going longer maybe a really tight fit.
We can discuss the molds, if it is going to just be used for home building then I am willing to let them go. My mold allows you to mix and max rocker sections to whatever you want.
I have:
2 stock tip/tail sections - ~ 6cm tip rise over 15cm
2 15cm x 1.5cm rocker sections
2 25cm x 2cm rocker sections
1 25cm x 2.5cm rocker section
2 35cm x 2.5cm rocker sections
I also have the top mold.
I would also allow you to take all the aluminum that comes with the press, which is a few hundred bucks in 1/16" 6061 aluminum sheeting in mostly pretty good shape. This would be around 10-12 sheets.
Main frame
I think all together this easily cost $4000. Looking to get 1/2 that ideally, but who knows. I would be willing to work out a payment plan too.
I may have a local buyer, but I need to work out the details.
It would need to be picked up pretty soon. If you have a full size truck bet it will fit completely fine. I will help take it apart (which will also show you how to put it together) which takes around 2 hours.
Once together, and plugged it, it is ready to press.
Located in Tacoma, WA. I could also possibly deliver to somewhere between Tacoma and Portland next Thursday, the 7th.
Email me at skiups9ATgmailDOTcom to discuss this more. Thanks.Seriously, this can’t turn into yet another ON3P thread....
-
07-30-2008, 01:17 PM #2
Sickness!
-
07-30-2008, 01:29 PM #3Registered User
- Join Date
- Dec 2005
- Location
- Vancouver
- Posts
- 814
BUUUUUUUHHHHHHHHH!!! I'm about to have a heart attack just thinking of the possibilities...but alas, a 15 hour drive and funds means it wasn't meant to be.
-
07-30-2008, 02:40 PM #4
gettin out of the biz already?
Lobstah- Hows your pressin' coming?
-
07-30-2008, 02:57 PM #5
-
07-30-2008, 04:01 PM #6Hucked to flat once
- Join Date
- Oct 2005
- Location
- Idaho
- Posts
- 11,001
-
07-30-2008, 04:10 PM #7
Well I'm almost ready did a tester to make sure she goes all night at 60 psi. Looks good I kinda fuckt some core profiling, after visiting pmgear I will revise my profile slightly.
-
07-30-2008, 04:35 PM #8
Well....my shop is only 13' x 17', and in regards to floor space I have this press in there, along with an 8'x3' workbench, 7'x2.5' workbench, 5'x2' workbench, a table saw, 14" band saw, 20 gallon air compressor, 7'x2' set of storage shelves, and a dust collector taking up floor space, and I make due. Tons of other tools too....
so not too much. Technically the whole footprint is 8' x 3', because the base of the legs is 3' wide, but otherwise the press is 16" at it widest (from the outside of the two legs).
Then just add an air compressor, which can fit underneath.
Hopefully that helps.Seriously, this can’t turn into yet another ON3P thread....
-
07-30-2008, 04:53 PM #9Hucked to flat once
- Join Date
- Oct 2005
- Location
- Idaho
- Posts
- 11,001
-
07-30-2008, 04:56 PM #10
you don't need a big compressor at all.
-
07-30-2008, 05:08 PM #11
-
07-30-2008, 06:46 PM #12Seriously, this can’t turn into yet another ON3P thread....
-
07-30-2008, 06:48 PM #13
Hoping for a double bay, double wide with 2 heat blankets per bay. Just need to find a bit of funding!
Plus it will be welded, not drilled like this one. So it won't take nearly as long to build. Once everything is cut I bet the frame could be done in like a week.
I seriously think the drill for this press was easily over 100 hours....it is like 15 feet of 1/2" holes....Seriously, this can’t turn into yet another ON3P thread....
-
07-31-2008, 04:11 PM #14
-
07-31-2008, 04:58 PM #15
hey iggy, stop messing around with selling that thing and press my fucking skis. thanks.
-
07-31-2008, 10:25 PM #16
Looks like one pair of skis used a ton of epoxy! Was this one on the skibuilders.com forum? If for some reason you wanted to sell the blanket/controller I'm interested.
-
08-01-2008, 12:29 AM #17
haha that picture was taken during my first tester pair ever. I WAY overdid it. There was epoxy everywhere, definitely ruined the rocker sections I have set up and everything. Lesson learned.
I think I weighted out like 800 grams or something ridiculous for that first tester pair, which was a 186cm 132/104/120.
I think I use like 520 grams on the ski I am pressing this very second that is 191cm 145/125/130 and I could definitely get away with less.
It was quite the mess that first time.Seriously, this can’t turn into yet another ON3P thread....
-
08-01-2008, 10:36 AM #18
I wish I did not live 20 hours away, that thing looks sick!
-
08-02-2008, 10:43 PM #19Stick and Move
- Join Date
- Jun 2008
- Location
- Seattle
- Posts
- 22
Stumbled on your excellent description of building the press and making the first couple pair of skis at the ski builders' forum. Amazed you were able to pull off such a herculean project while in school. Proper respect.
-
08-06-2008, 06:07 PM #20
The ON3P is a sweet ski. Iggy, ping me when you're up & running again. Stay with it!
Similar Threads
-
What is the effect of a heated boot bag on Intuition liners?
By 2stix in forum Tech TalkReplies: 12Last Post: 01-27-2008, 08:53 PM -
seeking ski press
By mikelaine in forum Tech TalkReplies: 13Last Post: 11-05-2006, 08:00 PM -
Why won't the press say Foley's Gay???
By Sinecure in forum The Padded RoomReplies: 69Last Post: 10-07-2006, 10:13 AM -
a fake reporter in the white house press corps?
By wookalar in forum General Ski / Snowboard DiscussionReplies: 39Last Post: 02-13-2005, 12:52 AM
Bookmarks