Name that hole pattern!

**phattypowpow** · 12-21-2007, 02:36 PM

Anyhow recognize the binding hole pattern for the PLUGGED holes in this pic? I know the open holes are a tele mount. I can provide measurements if that helps.

Once diagnosed, I will probably be looking for a pair of bindings to use these holes so I've you've got one, let me know. If anyone wants these Big Stix 106 (180cm) for $225+ship, speak up. Otherwise off to eBay they go with binders.

Thanks!

**lemon boy** · 12-21-2007, 02:38 PM

They could totally be linkens.

**phattypowpow** · 12-21-2007, 02:41 PM

Originally Posted by lemon boy

They could totally be linkens.

I totally forgot about the four holed Linken heel. I would kind of doubt it based on where I got these skis but you never know. Thanks.

**DropCliffsNotBombs** · 12-21-2007, 03:23 PM

Looks like a Rossi/Look demo binding. It might also be a race plate pattern. Not sure...

**DropCliffsNotBombs** · 12-21-2007, 03:24 PM

Looks like a Rossi/Look demo binding. It might also be a race plate pattern. Not sure...

**rabbit** · 12-21-2007, 03:35 PM

And if they are Linkens, which it looks like, they use the same pattern as Rottefella Supercarve-front. I havent been on Rottefellas in the last ten years so I cant promise it will fit the R8s (for example) but you might wanna look into Rottefella bindings if you dont have a pair of Linkens lying around.
If my memory serves me I think the hole pattern is 30mm wide and 100mm length measured from center of holes and Linken recommends a 4.1mm drill.

Hope this helps.

-peace
/r