Search:

^^ wrong, ice only on all acute injuries.

No test is ever 100% accurate. MRI for the lateral meniscus is about 80% accurate. I've seen athlets with big meniscus tears that did not show up on MRI, only to have an exploratory scope and find...

Same as above, use a long set epoxy. If you can find room to get a syringe in there, inject some epoxy as far in as you can and flex the ski a couple times, fill it as much as possible, clamp and...

Great day, my legs cry uncle!!

unless you are talking about a ski with metal in it, most the "binding reinforcement" "plates" you are talking about is nothing but another layer of fiberglass in the area that the bindings will be...

Buy a counter sink bit and flip it over to make a stop.

Bad idea, lots of liability in binding mounts.

^^^typically ski patrol, state police, organized mountain rescue teams, and on occasion national guard. volunteers sometimes

In Colorado I think you can buy into an insurance plan for $5.00 with the purchase of a hunting and fishing license. Please correct me if I'm wrong CO peeps.

To me this seems like the way to go....

^^ right then SAR bills the resort, the resort then tries to recoup their loss from the individual. is the gist of this bill. The resort is only able to recoup $500 from the individual based on the...

^^^While I try to avoid patrol most of the time, I don't know any self respecting medical professional that would do this.

I don't see VT state police enforcing this. It will be the VT ski resort bean counters and lawyers that try to enforce this as they try to make sure they don't lose money on these types of rescues....

Not at all. It's because at killington there have been so far ghis season 45 OB rescues of out of state tourists, 19 calls in one weekend at the same resort. 3 for the entire rest of VT.

These...

Damn, I was so pissed I couldn't type straight!

Signs like that would be find with me, preferable even. Especially if it keeps some folks from getting in over their heads but that's not what this is doing.

So a new bill just hit the VT state legislature making
1. ski resorts liable for the rescue of a skier that has left its boundaries and needs rescue.
2. ski resorts can add a fee onto their ticket...

I think you answered your own question then.....

You could fill it with JB weld paste and it would likely be fine. But I would contact Moment first. Send them a picture and ask if they would warranty it or if it should just be filled with epoxy.

we typically see patients getting into the pool at 3 weeks depending on how their incision has healed.


Look around your area for a facility that has an underwater treadmill. This is the best...

jellero ask about doing some pool therapy to work on gait and strength in a reduced weight bearing environment as a transition to full weight bearing rehab.

Slalom radius in deep snow =squirrelly ski that won't perform like you want.

Rocker tip-flat or minimal camber (2-4mm)-rocker tail for profile with reverse sidecut tip, traditional sidecut...

Nice shots Chris, the middle elevation stuff was $$$$, but still lacking base down low. Great reason for BIG skis for maximum flotation above the chocolate chips.

are your precautions for lifetime or only for the first 6 weeks?

I'll hopefully be able to add to that list in a couple months.131936

Clever

http://http://theepoxysource.com/Epoxy.htm

It's Hardman not Hartman.

north facing, very little sun, slow lifts and wind....hmmm sounds like a good recipe for frostbite.

DTM, if you were my patient, I'd tell you to wait a bit more than 3 weeks to begin low impact exercises. I'd likely tell you to wait 1-2 more weeks before trying much of anything that stresses the...

+1 for the griffon or jester demo. Looks and feels like a regular binding, very little weight difference from the regular version, no stack height issue.

^^JB weld comes in putty and a thick 2 part liquid.

good to hear DTM, dang that was a big'un

If they are new they should still be under warranty. Bring them back to the shop and see what they say. I would try to warranty these before screwing around and trying to fix something that looks...

Are these new, bought second hand, remounted..need more info.

Love platty pics.....my home town. Was there over Christmas. I still love skiing there.

Ok anterior hip pain like that could be a few things.

Labral tear
Illiopsoas bursitis
Hip flexor strain
Avulsion fracture


Still no way to tell without a good exam.

To subluxation your hip with be very traumatic, is no something you just do by squatting.

Form your description it is impossible to even tell where your pain is, forget about where it is coming...

I handled a pair if the FR pros the other day. It looks like they have improved some since the last time i skied them several models ago. The spring loaded tab on the walk mode lock is an improvent...

If they are only a fiberglass laminate, the chances of you increasing that rocker on your own somehow is minimal without damaging the ski. If it is a metal laminate, maybe you can bend them into...

Asked for one for Christmas. I'll let you know then.

Yeah, that's garbage. If it were me I'd make an acrylic template out of their sticker.

The shop says 55mm on center up front and 29mm in the back.

Why all the secrecy with this plate and template?

If they respond I'll see if they will do it.

I emailed a shop close by asking them to measure the template. Hopefully they'll help out.

Thanks Terry. I may just have to go to a shop and measure them myself if I can find someplace that carries them.

FKNA! That was exactly what I was looking for, thanks. I'd love that in a PDF. If you have it.

I make my mounting zone no narrower than 57mm. I'll likely extend this to at least 60mm to give at...

new dukes are 46mm between the screws and cross checked this with Jondrums paper templates. The Guardians are close at 42.5mm, Look FKS are 42mm between the screws.

That is not my concern and was not my question. My concern is more for how I design and build my ski cores to ensure I get good dense hardwood under binding screws.

Who can tell me what current bindings have the widest screw hole patterns?

The trend has been to widen the binding mounts to aid in performance and power transfer on wider skis. I'm curious to...

Greg, nice pic in Backcountry Mag. Well done, congrats.

Excited to hit the WROD tomorrow on some new skis. Can't wait to see how this design works, 4 dimension ski like the Armada TST. rocker-reverse up front and traditional sidecut and camber the rest of...