Search:

13.7 HST at stonehenge now...... arghhh

I love mine...

dynastar legend 115, in 175. rockered tip, camber under foot.
new $300

is the road open to morraine lake now?
I've tried 3 times on that line, got to ski it from the top once....

welcome: is the beer in the mail?

kryrpton is mid volume....

narrower boot.

or add some padding to the Kry tongue, right at the flex point

as long as the bolting pattern (6 bolt vs center lock) and the rotor size is the same, Yes, they should be

You can straighten a bent rotor with a adustable wrench, or the park rotor truing tool.

smallest fitting is the dynafit TLT in 22.

search, I've posted about them, No idea where to find a pair cheap

humm, I've been wondering if I could ski a 24 rather then my 25. worst case I can use the parts, and liners.....

how much more for shipping to banff, alberta, canada, T1L 1B7?

should be tight enough to spin freely. Not grind, not have play side to side

Are the cups on the correct side? might loosen up if installed backwards (and you have then cross threaded the...

anyone holding?

should be fine, check that the chain is not worn, A new chain (and rings and cassette) can add up fast....

My old XTR's on the single speed are finally dead. Would LOVE to find another set of M951/952 cranks, as I have all the rings etc. but looking for a 180 mnt bike crank, that can take a 30-34T ring....

bacon sandwich offer still holds...

bump, someone buy this!

Cndale is $1000ish

5.5 $1500? (not sure, maybe its worth more?)

wow, nice build

25 shell = 300 BSL

wow that binding is in HIGH demand, you might want to ask more for such a fat ski too.

bootleg has limited XC , maybe a days worth(from what I remember)

blue diamond (south of redrocks) is good for 1-2 days as well?

drive north to St George/Hurricane. more options in that...

seat post rack?

I've got an older, full length therma rest you can have.

get a cochise 130, same shape, but with walk mode?

go smaller.... and make more room as needed.

get a really thin sock,

get supportive footbeds

get liners heat molded, with thick toe caps, and padding on any wide bits of your foot.

ski...

295 BSL, is me and time2climb too....

return, get smaller, with a 5-15mm shell fit

new liners first. intuition in vancouver is great

then new footbeds (or other support)

then punch shell (not a problem on a cuff screw, If it is for the shop you deal with, I can do it in...

I think I have a alpine wrap in 8. $100 with shipping?

baked once and used a bit, was in backup boots. only

I would just power drive down and ride once you arrive. Sunvalley, SLC all have lots of good riding, just not ready yet....

20 hours to moab.

buy an afternoon only ticket for SSV. its spring anyways, the AM can be icy

flying into Reve?

or thru calgary?

will be in the area 22-28 (yes, driving from canukistain) any news if whole enchilada is open from the top?

its a tighter fit, so I think maybe as a base layer, and NO as an outer layer...

I'm 5'10 and #155, and it works for either for me....

I've been able to re-flatted the inside washer, with a boot fitting press.

gave the guy another 50-100 days...

if you find something pedalable...
transrockies.

or just hang out in fernie for a week.

just ski faster, and skip over the top of them..

I think dynafits on bigdumps sounds good.

I'm in the rockie mountains, in the frozen waste lands of canukistain (banff) so I usually have layers on.

But spring time will be less layers....

If this fits, I'll be thru SLC on the 20th

...

Any guess if the vest will be too big for a skinny guy at #155 pounds and 5'10?

and same question as goneskiing. same canister work in both?

hummm, was thinking about this for next year

any idea what Wary has done from 2012 (I assume yours is 2012?) to the 2013 model?

what is the person size range on this vest?

silk weight capiline for the outer one (pattern)

cotton on the other

they are too soft for her to use with her 187 hojis, and she is usually on a 130 salomon X3 boot.

but for touring, skiing softer snow, they are fine for that..

its spring, you can't give away ski stuff, even on TGR...

its scarey the low prices, that people are not jumping on.





plus its dentist convention season...

the boots pack out, after how many days? If the shell fit is right, I find that most liners last for 100-200 days.

Foam will fill in the extra space, and lasts 300-600 days? just make sure...

yup, still got it

I have one from a 25 boot. 7 1/4 inches from exposed metal end, to the loop.

$20 shipped?

https://www.norco.com/bikes/urban/urban-performance/indie-drop/

neat option for DI2,

anyone ?

another vote for Tyson:

He has been up to help with the transrockies bike race, and is a great wrench.

I use intuition liner, no footbed, and a small wedge between the liner and the shell, on the inside. This tilts me to the outside a bit, but from the heel, not the arch.

why do I have this? cuz...

how did this go?

bumpity bump bump