Marker tech manual

[skibomb]

After extensive and unsuccessfully searching the interwebz for the Marker tech manual, I ended up having my Barons mounted on my Mojo 94s by a shop, because I didn't want to risk it without the proper documentation (have mounted tyrolia, salomons, naxos in the past myself with manufacturer's recommendations to hand, and never had any issues).

Now, after 5 days of skiing I noticed some of the screws starting to work loose, and I'm started to suspect that the shop hasn't properly tapped/glued when doing the mount. Apart from the conversation I'm likely to have with the shop in question, does anyone know where we can find a pdf Marker tech manual - what's the deal with this being so hard to find?

Anyone willing to share or have any leads?

Cheers!

[rludes025]

the Care and feeding or your Duke or Barons (http://www.tetongravity.com/forums/showthread.php/143730-Care-and-feeding-of-your-Dukes-or-Barons/page6) thread will have everything you need.

[Wooster]

I don't want to hijack the thread, but does anyone have a pdf of an old Tyrolia manual that includes the Railflex 2 bindings? Every link to one that I've been able to find on TGR is dead.

[wooley12]

Start your search here

http://www.tetongravity.com/forums/showthread.php/78874-Tyrolia-Railflex-II-illustrated-mounting-and-usage-guide

[Wooster]

Start your search here

http://www.tetongravity.com/forums/showthread.php/78874-Tyrolia-Railflex-II-illustrated-mounting-and-usage-guide
No luck. Link is dead.

[gregL]

Here's the template:

http://www.wildsnow.com/backcountry-ski-pdfs/baron-duke-mount.pdf

Not sure what else you need. If you've mounted other bindings before and are familiar with alpine bindings in general, the adjustments for DIN are pretty standard. Toe height is adjusted by the AFD sliding up a ramp, but it's not hard to figure out. Forward pressure at the heel requires tighter spacing than you may be used to with other bindings, make sure the adjustment screw is flush with the housing with the boot in the binding. If you really want the Marker documentation, PM me with your address and I will send you a set.

[rludes025]

I don't want to hijack the thread, but does anyone have a pdf of an old Tyrolia manual that includes the Railflex 2 bindings? Every link to one that I've been able to find on TGR is dead.

This thread should help
(http://www.tetongravity.com/forums/showthread.php/78874-Tyrolia-Railflex-II-illustrated-mounting-and-usage-guide?)

its shocking how useful google is...

[Wooster]

Yep, read through that several times. Just looking for the manual for the sake of having a copy.

[skibomb]

the Care and feeding or your Duke or Barons (http://www.tetongravity.com/forums/showthread.php/143730-Care-and-feeding-of-your-Dukes-or-Barons/page6) thread will have everything you need.

Sure - lots of info, but not the tech manual.

[skibomb]

Yep, read through that several times. Just looking for the manual for the sake of having a copy.

PM me your email address, and I'll send you the PDF version of the 06/07 and 07/08 tech manuals I have, which cover railflex.

[skibomb]

Here's the template:

http://www.wildsnow.com/backcountry-ski-pdfs/baron-duke-mount.pdf

Not sure what else you need. If you've mounted other bindings before and are familiar with alpine bindings in general, the adjustments for DIN are pretty standard. Toe height is adjusted by the AFD sliding up a ramp, but it's not hard to figure out. Forward pressure at the heel requires tighter spacing than you may be used to with other bindings, make sure the adjustment screw is flush with the housing with the boot in the binding. If you really want the Marker documentation, PM me with your address and I will send you a set.

Thanks for the offer - will send you a PM!